If you have a Haier washing machine, you may find that the lid switch needs to be bypassed in order to get the machine to work. Bypassing the lid switch is a relatively simple process that requires a few tools and a bit of patience. This guide will walk you through the steps necessary to bypass the lid switch on your Haier washing machine.
How Do I Bypass The Lid Switch On A Haier Washing Machine
The lid switch on a Haier washing machine is designed to prevent the machine from running with the lid open. However, if the lid switch is broken, it can be bypassed by disconnecting the lid switch wires from the machine’s control board and connecting them together. This will allow the machine to run with the lid open. It is important to note that bypassing the lid switch can be dangerous and should only be done if absolutely necessary.
How Do I Bypass The Lid Switch On A Haier Washing Machine
1. Unplug the washing machine from the wall outlet.
2. Remove the lid of the washing machine and locate the lid switch.
3. Disconnect the wires from the lid switch.
4. Connect the wires from the lid switch to a bypass switch.
5. Plug the washing machine back into the wall outlet.
6. Test the washing machine to see if the bypass switch is working.
In conclusion, bypassing the lid switch on a Haier washing machine is not recommended as it can cause damage to the machine and void the warranty. It is best to contact a qualified technician to diagnose and repair the issue. If the lid switch is faulty, it should be replaced with a new one. If the lid switch is not faulty, then the issue may be with the wiring or the control board.