Appliance Part Help
Washer troubleshooting guide

Washer shaking violently, banging or walking: what to check and what to replace

Some movement during a fast spin is normal. Violent shaking, banging or a washer that walks across the floor usually comes from an unbalanced load, an unlevel machine, or worn suspension parts: suspension rods on top-loaders, shock absorbers on front-loaders. A loud roar or rumble that grows with spin speed points to the tub bearings instead.

Updated November 16, 2026. Sales shares are estimates for May to October 2026.

2part types to check
38part numbers compared

Check these first

  1. Rebalance the load. A single heavy item (a bath mat, a comforter, one pair of jeans) or a tangled load causes most shaking. Wash bulky items with a few towels.
  2. Level the washer. Use a level across the top, adjust the feet and tighten their lock nuts. All four feet must touch the floor; push on opposite corners to check it does not rock.
  3. Check the floor. Wooden floors flex; an anti-vibration pad or a plywood base helps.
  4. New washer? Make sure the shipping bolts were removed from the back of a front-loader.
  5. Check the suspension. On a top-loader, push down on the empty tub: it should spring back and settle, not bounce or bang. On a front-loader, a tub that bounces or a shock that moves freely by hand means worn shocks. Replace them as a set.
  6. Listen to the spin. A roar that gets louder with speed means worn tub bearings, usually found on front-loaders. It is a big repair; compare the cost with a new washer.

Shock absorbers and suspension rods, most bought first

Top-loaders use a set of four suspension rods; front-loaders use two or more shock absorbers. Replace the whole set.

Most bought first, by share of estimated Amazon sales across 36 part numbers. All shock absorber part numbers

  1. 1Samsung DC97-16350U21% of sales

    Set of four suspension rods for Samsung top-load washers such as the WA50R5200AW, WA50R5400AV and WA45T3200AW. Many listings sell it as one kit with DC97-16350T and DC97-16350S.

    20 listings from 19 brands. Most-bought aftermarket: Vypart, BNRSZ, Pulluty. Fits 3 listed models, for example WA50R5200AW/US, WA50R5400AV/US, WA50R5400AW/US.

    Compare DC97-16350U replacements
  2. 2Samsung DC97-16350T17% of sales

    Suspension rod sold in the same kits as DC97-16350U for Samsung top-loaders (WA45, WA50 series). Check the rod length against your old ones.

    12 listings from 11 brands. Most-bought aftermarket: Vypart, BNRSZ, Cusvivid.

    Compare DC97-16350T replacements
  3. 3Whirlpool W1113036215% of sales

    Suspension rod kit for Whirlpool, Maytag and Kenmore top-loaders such as the WTW5000DW and MVWC565FW. Replaces W10594080, W10780040 and others.

    14 listings from 14 brands, including Whirlpool's own part. Most-bought aftermarket: Pulluty, Funmit, Replizo. Fits 11 listed models, for example MVWC565FW0, WTW5000DW0, WTW5000DW1, WTW5000DW2.

    Compare W11130362 replacements
  4. 4Whirlpool W1078004515% of sales

    Suspension rod kit for Whirlpool, Amana and Kenmore top-loaders such as the WTW4816FW, NTW4516FW and WTW4800BQ.

    13 listings from 13 brands, including Whirlpool's own part. Most-bought aftermarket: Beaquicy, APPLIANCEMATES, OUMETE. Fits 14 listed models, for example NTW4516FW0, NTW4516FW1, NTW4516FW2, NTW4516FW3.

    Compare W10780045 replacements
  5. Longer suspension rods (about 27.6 inches) for larger Samsung top-loaders such as the WA54R7200 and WA54R7600. Listings give DC97-16350Y and DC97-18610C as alternates.

    9 listings from 9 brands. Most-bought aftermarket: BNRSZ, Casmer, Vypart.

    Compare DC97-16350V replacements
  6. Suspension rod kit for top-loaders such as the WTW4800XQ, RTW4640YQ and ATW4675YQ. Listings give W10257087 and W10257088 as older numbers.

    11 listings from 11 brands, including Whirlpool's own part. Most-bought aftermarket: Beaquicy, Blutoget, AMI PARTS.

    Compare W10780048 replacements
  7. Suspension rod sold in the same upgraded kits as DC97-16350U and DC97-16350T for Samsung WA45 and WA50 top-loaders.

    7 listings from 7 brands. Most-bought aftermarket: Pulluty, BNRSZ, Susavivid.

    Compare DC97-16350S replacements
  8. Suspension rod set for older Samsung top-loaders such as the WA400PJHDWR, WA40J3000AW and WA456DRHDSU.

    4 listings from 4 brands. Most-bought aftermarket: MONKEMON, Beaquicy, Techecook. Fits 11 listed models, for example WA400PJHDWR/AA, WA40J3000AW/A2, WA40J3000AW/AA, WA456DRHDSU/AA.

    Compare DC97-05280W replacements

Tub bearings and seals (roaring during spin)

Most bought first, by share of estimated Amazon sales across 2 part numbers. All tub bearing kit part numbers

  1. 1Whirlpool W10435302100% of sales

    Tub bearing and drive shaft kit for Whirlpool-built top-load washers such as the WTW6800. A major repair; some listings add the bearing tool and tub seal.

    6 listings from 6 brands, including Whirlpool's own part. Most-bought aftermarket: Funmit, TOMOON, Pilida. Fits 2 listed models, for example WTW6800WE1, WTW6800WU1.

    Compare W10435302 replacements
  2. 2LG 4280EN4001Cunder 1% of sales

    Tub bearing for many LG front-load washers. Replace the tub seal at the same time.

    2 listings from 2 brands, including LG's own part. Most-bought aftermarket: Part Supply House. Fits 47 listed models, for example F12A1FDP, GCWF1069CD3, GCWF1069QD3, GCWF1069QS1.

    Compare 4280EN4001C replacements

More washer guides

See the washer error code guides for Samsung (dC, UE), LG (UE) and Whirlpool (UL).

Frequently asked questions

Why does my washer shake so much on spin?

Usually an unbalanced load or an unlevel washer. If it shakes with normal, well-spread loads, the suspension rods (top-loaders) or shock absorbers (front-loaders) are probably worn.

How do I stop my washer from walking?

Level it and lock the feet, make sure all four feet touch the floor, avoid single heavy items, and use an anti-vibration pad on wooden floors.

What is the most bought washer suspension part?

DC97-16350U, at about 21% of estimated Amazon sales across the 36 shock absorber and suspension rod numbers we compare.

As an Amazon Associate I earn from qualifying purchases. Sales shares are our estimates of Amazon sales and are rounded. Aftermarket parts are made by third parties, not by the makers. How this works