Shop-Vac filters: find the right replacement for your wet/dry vac
Shop-Vac uses a handful of filter types: a pleated cartridge for dry pickup, a foam sleeve for wet pickup, small disc filters for some compact models, and HEPA versions of the cartridge for fine dust. The right one depends on your tank size and what you are picking up, and the number is usually molded into the filter's end cap.
Shop-Vac's own listings take under 1% of estimated Amazon sales across these numbers. The rest goes to 22 other brands that make compatible filters, many sold in multi-packs.
Shop-Vac vacuum filter part numbers, most bought first
Share of estimated Amazon sales across all 5 numbers. Open a part to compare every replacement.
The standard pleated cartridge filter for most Shop-Vac wet/dry vacs of 5 gallons and up. 90350 is the same filter under a newer number, and many listings also fit 90333.
20 listings from 16 brands, including Shop-Vac's own part. Most-bought aftermarket: Cabiclean, Extolife, ATXKXE.
Compare 90304 replacementsThe foam sleeve for wet pickup on Shop-Vac vacs of 5 gallons and up. It slips over the filter cage in place of the cartridge.
10 listings from 8 brands. Most-bought aftermarket: YH Maialan, CERO, Zibopon.
Compare 90585 replacementsA reusable disc (dry) filter for some smaller Shop-Vac and other wet/dry vacs. Often sold in packs with retaining bands.
3 listings from 2 brands. Most-bought aftermarket: JAMHER, Zibopon.
Compare 90107 replacementsThe small Type AA cartridge filter for compact Shop-Vac vacs of about 1 to 4 gallons.
5 listings from 5 brands. Most-bought aftermarket: Zibopon, Nerans, ANBOO.
Compare 90398 replacementsA cartridge filter for Shop-Vac vacs of 5 gallons and up. Some listings sell it alongside 90304 and 90350.
2 listings from 2 brands. Most-bought aftermarket: LVJUSEN, HQRP.
Compare 90340 replacements
How to find the right Shop-Vac filter
- Read the old filter. The number is usually printed on the end cap or the side of the cartridge.
- Match the tank size. Cartridges for 5-gallon-and-up vacs (90304 family) do not fit compact 1 to 4 gallon vacs (90398).
- Match the job. Use a pleated cartridge for dry dust, a HEPA cartridge for fine dust such as drywall or ash, and the foam sleeve for water.
How to change a Shop-Vac filter
- Unplug the vac and take off the motor head.
- Unscrew the lid or nut holding the cartridge to the filter cage and pull the cartridge off.
- Tap out the dust into a bag outdoors, or rinse a washable filter and let it dry fully before use.
- Slide the new filter on and tighten the lid or nut so no air can bypass it.
Frequently asked questions
What filter does my Shop-Vac use?
Most Shop-Vac vacs of 5 gallons and up use the 90304 cartridge (also sold as 90350). Compact 1 to 4 gallon vacs use the 90398 Type AA cartridge. Wet pickup uses the 90585 foam sleeve.
What is the most bought Shop-Vac filter?
90304, at about 62% of estimated Amazon sales across the 5 Shop-Vac filter numbers we compare.
Can I vacuum water with the cartridge filter on?
Shop-Vac recommends removing the paper cartridge for wet pickup and using the foam sleeve. A wet paper cartridge clogs and can be damaged.
As an Amazon Associate we earn from qualifying purchases. Sales shares are our estimates of Amazon sales and are rounded. Aftermarket parts are made by third parties, not by Shop-Vac. How this works
All vacuum filter part numbers · All Shop-Vac parts · All guides