Appliance Part Help
Washer repair guide

GE washer drive belt: find your part number

Many GE and Hotpoint top-load washers drive the basket with a belt from the motor. A worn or broken belt causes a washer that will not agitate or spin, a burning rubber smell, or a squeal. This guide covers the 4 GE belt and drive numbers we track and what other shoppers buy.

Updated November 16, 2026. Sales shares are estimates for May to October 2026.

4GE part numbers
74%of sales go to WH01X27538
16%bought as GE's own part
15aftermarket brands

GE washer drive belt part numbers, most bought first

Share of estimated Amazon sales across all 4 numbers. Open a part to compare every replacement and search its full model list.

  1. 1GE WH01X2753874% of sales

    A GE drive belt for GE and Hotpoint washers.

    9 listings from 9 brands, including GE's own part. Most-bought aftermarket: NBPLUS, WAO ZONE, ZNBSIXP.

    Compare WH01X27538 replacements
  2. 2GE WH01X2418017% of sales

    A GE drive belt for GE washers.

    5 listings from 5 brands. Most-bought aftermarket: WAO ZONE, PartsBroz, Amesias.

    Compare WH01X24180 replacements
  3. 3GE WH03X305177% of sales

    A GE shift actuator and drive belt set for top-loaders such as the GTW220.

    6 listings from 6 brands, including GE's own part. Most-bought aftermarket: Cusvivid, Ninayu, Allstar Appliance Parts. Fits 101 listed models, for example GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW220ACK4WW.

    Compare WH03X30517 replacements
  4. 4GE WH01X103021% of sales

    A GE drive belt for more than 560 listed GE washers.

    2 listings from 2 brands, including GE's own part. Most-bought aftermarket: Galloparts. Fits 561 listed models, for example EJRR4170E6WW, EWA4500DCWW, EWA4600G0WW, EWA5600G0WW.

    Compare WH01X10302 replacements

Make sure it is really the belt

  • Unplug the washer and look underneath or behind the back panel: a belt that is cracked, glazed, loose or off the pulleys needs replacing.
  • Smell and listen. A burning rubber smell or a squeal during the spin often means the belt is slipping.
  • Check the shift actuator on newer GE top-loaders: if the motor runs but the washer will not switch between agitate and spin, the actuator may be at fault.

How to find the right part number

  • Read the model number under the lid or on the back of the console. Each part page lists the models the belt fits.
  • Check the motor size. Some GE washers use different belts for 1/3 and 1/2 horsepower motors.

GE's own belt or an aftermarket one?

Across these 4 part numbers, GE's own listings make up 16% of estimated Amazon sales (May to October 2026). The rest goes to 15 aftermarket brands, led by NBPLUS, WAO ZONE and ZNBSIXP.

Aftermarket belts are usually cheaper. Check the length and profile against your old belt, and check that the listing names your washer model.

Frequently asked questions

What is the most common GE washer drive belt?

By estimated Amazon sales, WH01X27538 is the most bought, at about 74% of sales across the 4 GE numbers we track.

How do I know if my GE washer belt is bad?

A washer that will not spin or agitate while the motor runs, a burning rubber smell, or a squeal during the spin are common signs. Look at the belt for cracks, glazing or slack.

As an Amazon Associate I earn from qualifying purchases. Sales shares are our estimates of Amazon sales and are rounded. Aftermarket parts are made by third parties, not by GE. How this works