Welcome to your new Maytag freezer! Before you can turn it on, you need to make sure that it is properly laid down and level. This process should take about 15 minutes. First, you need to make sure that the freezer is in the correct position. Place the freezer on its back and make sure that all four feet are securely on the ground. Next, use a level to make sure that the freezer is level. If it is not level, use the adjustable feet on the bottom of the freezer to adjust it until it is level. Once the freezer is level, you can turn it on and begin using it.
Freezer Laid Down 15 How Long Before Turn On Maytag
It is recommended to wait 24 hours before turning on a new Maytag freezer. This allows time for the coolant to settle and the temperature inside the freezer to stabilize.
Freezer Laid Down 15 How Long Before Turn On Maytag
1. Unplug the refrigerator.
2. Remove all food and shelves from the refrigerator.
3. Clean the interior with a mild detergent and water.
4. Dry the interior completely.
5. Place a piece of cardboard under the refrigerator to protect the floor.
6. Lay the refrigerator on its back and secure it with straps or rope to prevent it from shifting.
7. Vacuum the condenser coils on the back of the refrigerator.
8. Plug the refrigerator back in.
9. Allow the refrigerator to sit for at least 24 hours before turning it on. This will allow the lubricant in the compressor to settle.
10. Turn the refrigerator on and check the temperature.
11. Replace the shelves and food.
In conclusion, it is important to remember that it can take up to 15 hours for a Maytag freezer to reach the optimal temperature before it can be turned on and used. This is to ensure that the freezer is working properly and that the food stored inside is kept safe and fresh. It is important to follow the manufacturer’s instructions and wait the full 15 hours before turning on the freezer.