If your Kenmore freezer drawer won’t open all the way, it can be a frustrating experience. Fortunately, it is usually a fairly easy fix. In this guide, we will walk you through the steps to diagnose and repair the drawer so that it opens and closes properly. We will cover common causes of the issue, such as misaligned hinges, broken drawer slides, or a damaged latch. We will also provide tips on how to prevent the issue from happening again in the future. With the right tools and some patience, you can get your Kenmore freezer drawer opening and closing like new in no time.
Fixing Kenmore Freezer Drawer That Wont Open All The Way
If your Kenmore freezer drawer won’t open all the way, there are a few steps you can take to fix the issue. First, check the drawer for any items blocking the opening. If there are any items blocking the drawer, remove them. If the drawer still won’t open, check the drawer slides for any blockages. If the slides are blocked, remove the blockage and then try opening the drawer again. If the drawer still won’t open, you may need to adjust the drawer slides. To do this, loosen the screws on the slides and adjust the slides until the drawer opens and closes smoothly. Finally, tighten the screws and test the drawer again to ensure it opens and closes properly.
Fixing Kenmore Freezer Drawer That Wont Open All The Way
1. Check the hinges and make sure they are not blocked by ice or debris.
2. Check the drawer tracks and make sure they are not blocked by ice or debris.
3. If the tracks are blocked, use a hairdryer to melt the ice.
4. If the hinges are blocked, use a flathead screwdriver to carefully pry them open.
5. If the hinges are still blocked, use a lubricant to loosen them.
6. If the drawer still won’t open all the way, check the alignment of the drawer and the tracks. If the drawer is misaligned, use a flathead screwdriver to adjust the alignment.
7. If the drawer still won’t open all the way, replace the drawer or the tracks.
After troubleshooting the Kenmore freezer drawer, it was determined that the drawer was not opening all the way due to a broken spring. Replacing the spring was a relatively simple process that took only a few minutes. After replacing the spring, the drawer opened and closed properly. This was a relatively simple fix that saved time and money.