Haier washing machines use a standard size drainage hose for draining the water from the machine. The size of the hose is usually 1-1/4” in diameter and 6 feet in length. This size is common for most washing machines and is widely available in hardware stores. The hose should...

Choosing the right temperature and level for your Haier Gallery washing machine is an important part of ensuring your laundry is properly cleaned and cared for. The temperature and level settings on your washing machine can affect the effectiveness of the cleaning process and the care of your clothes....

Changing the water pump on a Haier washing machine is a relatively simple process that requires a few basic tools and a bit of patience. Before starting, make sure you have all the necessary tools and parts. You will need a screwdriver, a pair of pliers, and a new...

If you need to reset your Haier washing machine, it is a relatively simple process. To reset the machine, you will need to first unplug the power cord from the wall outlet. Wait for a few seconds before plugging it back in. Once the power is restored, press and...

If your Haier washer lid lock is stuck and you need to reset it, then you have come to the right place. Resetting the Haier washer lid lock is a relatively simple process that can be done in a few steps. In this guide, we will walk you through...

Opening the door of a Haier washing machine is easy. All you need to do is locate the door handle on the front of the machine. This handle should be located on the right side of the machine. Once you have located the handle, simply pull it towards you...

Haier washer dryers are a popular choice for many households, but they can sometimes have issues. One common problem is when all the lights on the dryer start flashing when drying. This can be caused by a variety of issues, from a faulty connection to a blocked filter. Fortunately,...

Haier recommends using a liquid detergent specifically designed for washing machines. This detergent is specially formulated to be gentle on fabrics, while providing a deep clean and removing tough stains. It is also designed to be low-sudsing, which helps to prevent the build-up of residue in the washing machine....

If your front loading Haier washing machine is not working properly, it may be due to a bad motor. To determine if the motor is bad, you will need to do some troubleshooting. First, check the power cord to make sure it is securely plugged into the wall and...

The fuse on a Haier dryer is located on the back of the dryer. It is typically located near the bottom of the dryer and is easy to access. The fuse is usually a small, white, cylindrical piece that is connected to the dryer’s power cord. It is important...