Amana Washer Ntw4650Yq0 Won’T Spin

Title: Amana Washer NTW4650YQ0 Won’t Spin

Have you ever faced the frustrating situation where your Amana washer NTW4650YQ0 refuses to spin? It can be a real headache, especially when you have a pile of dirty laundry waiting to be cleaned. But fear not! In this blog post, we’ll explore the possible reasons behind this issue and provide you with some simple troubleshooting steps to get your washer spinning again. So, let’s dive right in and solve this problem together!

Understanding the Importance of the Spin Cycle

Before we delve into the troubleshooting steps, let’s understand why the spin cycle is so crucial in a washing machine. The spin cycle is responsible for removing excess water from your clothes after the wash cycle. Without it, your clothes would come out dripping wet, requiring longer drying times. So, getting your Amana washer NTW4650YQ0 to spin properly is essential for efficient laundry cleaning.

Possible Reasons for the Washer Not Spinning

Several factors can cause your Amana washer NTW4650YQ0 to refuse to spin. Let’s explore some of the common culprits:

1. Lid Switch: The lid switch is a safety feature that prevents the washer from spinning when the lid is open. If the switch is faulty or not engaging properly, it can interrupt the spin cycle.

2. Drive Belt: The drive belt connects the motor to the drum, enabling the spinning motion. If the belt is worn out or broken, it will prevent the drum from spinning.

3. Motor Coupling: The motor coupling connects the motor to the transmission. If it becomes damaged or worn out, it can prevent the washer from spinning.

4. Motor or Motor Control Board: If the motor or its control board malfunctions, it can lead to a lack of spinning action.

5. Clutch Assembly: The clutch assembly engages and disengages the transmission during the spin cycle. If it is worn out or damaged, it can cause the washer to refuse to spin.

Troubleshooting Steps

Now that we have an idea of the potential causes, let’s go through some troubleshooting steps to get your Amana washer NTW4650YQ0 back in action:

Step 1: Check the Lid Switch
– Open and close the lid firmly to ensure it engages the switch properly.
– If the switch is faulty, it may need to be replaced.

Step 2: Inspect the Drive Belt
– Unplug the washer and remove the back panel.
– Check if the drive belt is intact, properly aligned, and not overly worn.
– Replace the belt if necessary.

Step 3: Examine the Motor Coupling
– Disconnect the power supply and remove the cabinet or front panel.
– Inspect the motor coupling for any signs of damage or wear.
– Replace the coupling if needed.

Step 4: Test the Motor and Control Board
– Use a multimeter to check the motor and control board for continuity and proper functioning.
– If either component is faulty, consider replacing it.

Step 5: Evaluate the Clutch Assembly
– Remove the agitator to access the clutch assembly.
– Inspect the clutch for any signs of damage or excessive wear.
– Replace the clutch assembly if required.

Preventive Measures

To avoid future issues with your Amana washer NTW4650YQ0, consider these preventive measures:

1. Avoid Overloading: Overloading the washer can strain the motor and other components, leading to malfunctions.

2. Regular Maintenance: Clean the drum, lint trap, and other parts of the washer regularly to prevent clogs and ensure smooth operation.

3. Balanced Loads: Distribute the clothes evenly in the drum to maintain balance during the spin cycle.


Dealing with a non-spinning Amana washer NTW4650YQ0 can be frustrating, but with the right troubleshooting steps, you can get it back up and running smoothly. By checking the lid switch, drive belt, motor coupling, motor and control board, and clutch assembly, you can identify and resolve the issue. Remember to take preventive measures to keep your washer in good working condition. Now, go conquer that pile of laundry with your newly spinning Amana washer!