Amana Washer Nfw7200Tw10 Won’T Agitate

Title: Amana Washer Nfw7200Tw10 Won’t Agitate

Have you ever encountered the frustrating situation where your Amana washer Nfw7200Tw10 refuses to agitate? It can be quite perplexing, especially when you rely on your washer to keep your clothes clean and fresh. In this blog post, we will delve into the possible causes behind this issue and provide you with some practical solutions to get your washer back in action. So, let’s dive in and unravel the mystery behind your Amana washer’s agitation problem!

Understanding the Agitation Process

Before we jump into troubleshooting, let’s take a moment to understand how the agitation process works in your Amana washer Nfw7200Tw10. Agitation is the back-and-forth motion of the agitator that helps to clean your clothes by loosening dirt and stains. It is an essential step in the washing cycle, and any disruption to this process can hinder the effectiveness of your washer.

Possible Causes of Agitation Failure

1. Faulty Agitator Dogs: The agitator dogs are small plastic pieces located within the agitator that engage and rotate during the agitation process. Over time, these dogs can wear out, leading to a loss of agitation. If your washer makes a grinding noise but fails to agitate, it’s likely that the agitator dogs need replacement.

2. Worn Agitator Belt: Another potential culprit behind the lack of agitation is a worn or broken agitator belt. The belt connects the motor to the agitator, enabling it to move. If the belt is damaged, loose, or broken, the agitator won’t be able to function properly.

3. Malfunctioning Drive Motor: The drive motor is responsible for powering the agitator’s movement. If the motor is faulty, it may not provide sufficient power to rotate the agitator, resulting in a lack of agitation.

4. Defective Lid Switch: The lid switch plays a crucial role in the operation of your washer. It ensures that the washer only agitates when the lid is closed, preventing accidents. If the lid switch is malfunctioning, it can disrupt the agitation process and prevent your washer from agitating.

5. Clogged or Faulty Water Inlet Valve: The water inlet valve controls the flow of water into your washer. If the valve is clogged or defective, it may not allow enough water to enter the tub, impacting the agitation process.

Troubleshooting and Solutions

Now that we have identified some potential causes, let’s explore troubleshooting steps and solutions to get your Amana washer Nfw7200Tw10 agitating again:

1. Check the Agitator Dogs: Start by inspecting the agitator dogs. Remove the agitator cap and locate the agitator dogs beneath it. If they appear worn, broken, or damaged, it’s time to replace them. You can find replacement agitator dogs at appliance stores or order them online. Follow the manufacturer’s instructions to install the new dogs properly.

2. Examine the Agitator Belt: Inspect the agitator belt for any signs of wear, looseness, or breakage. If you notice any issues, replace the belt following the manufacturer’s instructions. You can find replacement belts at appliance stores or online.

3. Test the Drive Motor: To check if the drive motor is functioning correctly, you can perform a motor test. Consult your washer’s user manual for specific instructions on how to conduct this test. If the motor fails the test, it may need to be replaced. Contact a professional technician for assistance.

4. Inspect the Lid Switch: Verify that the lid switch is working properly by checking if it clicks when you close the lid. If it doesn’t click or appears loose, it may need to be replaced. Consult your washer’s manual for instructions on replacing the lid switch or contact a professional technician.

5. Clean or Replace the Water Inlet Valve: If you suspect that the water inlet valve is clogged, carefully remove it and clean it thoroughly. If cleaning doesn’t resolve the issue, consider replacing the valve. Refer to your washer’s manual or seek professional help for guidance on replacing the water inlet valve.


Dealing with a non-agitating Amana washer Nfw7200Tw10 can be a frustrating experience. However, armed with the knowledge of possible causes and troubleshooting steps, you can now tackle this issue with confidence. Remember to check the agitator dogs, inspect the agitator belt, test the drive motor, examine the lid switch, and clean or replace the water inlet valve if necessary. By following these steps, you’ll be well on your way to resolving the agitation problem and getting your Amana washer back to its efficient cleaning performance.