If you own a Kenmore 795.71033.010 refrigerator and are experiencing frost build-up in the freezer or inconsistent temperatures in the refrigerator compartment, it may be time to put your appliance into defrost mode. Defrosting your refrigerator can help maintain its efficiency and prevent damage to the unit. In this guide, we will walk you through the steps to put your Kenmore refrigerator into defrost mode, allowing you to address any issues with frost build-up or temperature fluctuations. Follow these simple instructions to keep your appliance running smoothly and efficiently.
How To Put A Kenmore 795.71033.010 Refrigerator In Defrost Mode
To put a Kenmore 795.71033.010 refrigerator in defrost mode, you will first need to locate the control panel on the front of the refrigerator. Once you have found the panel, locate the defrost button or setting on the control panel. Press and hold the defrost button or adjust the setting to activate the defrost mode.
While in defrost mode, the refrigerator will stop cooling and the defrost heater will turn on to melt any ice buildup on the evaporator coils. This process helps improve the efficiency of the refrigerator and prevent issues such as frost buildup or blocked airflow.
Once the defrost mode has been activated, the refrigerator will automatically return to its normal cooling mode after a set amount of time or once the defrost cycle is complete. It is recommended to only put the refrigerator in defrost mode when necessary to prevent excessive energy consumption and potential damage to the appliance.
How To Put A Kenmore 795.71033.010 Refrigerator In Defrost Mode
1. Locate the control panel on the front of the refrigerator. It is usually located on the upper right-hand side of the refrigerator.
2. Press and hold the “Light” button and the “Energy Saver” button at the same time for approximately 7 seconds. The control panel should display the letters “Fd” or “Frd” indicating that the refrigerator is now in defrost mode.
3. To exit defrost mode, press and hold the “Light” button and the “Energy Saver” button again for approximately 7 seconds. The control panel should no longer display the letters indicating that the refrigerator is in defrost mode.
4. Check to ensure that the refrigerator is defrosting properly by listening for any unusual noises or observing any water dripping from the evaporator coils.
5. If the refrigerator does not seem to be defrosting properly, consult the owner’s manual or contact Kenmore customer service for further assistance.
In conclusion, if you need to put a Kenmore 795.71033.010 refrigerator in defrost mode, the steps are simple and straightforward. By following the manufacturer’s instructions carefully, you can ensure proper operation and maintenance of your refrigerator. Remember to unplug the refrigerator before starting the defrost process, and always consult the owner’s manual for specific instructions. Regularly defrosting your refrigerator is essential for its performance and longevity. With these steps in mind, you can easily put your Kenmore refrigerator in defrost mode when needed.