Removing the filter from your Maytag dishwasher is a relatively simple process and should only take a few minutes. First, you will need to locate the filter. This is usually located at the bottom of the dishwasher. Once you have located the filter, you will need to open the access panel, which is usually located on the side of the dishwasher. Once the access panel is open, you should be able to see the filter. To remove the filter, you will need to unscrew it from the dishwasher. Once the filter is unscrewed, you can then pull it out of the dishwasher. After the filter is removed, you can then clean it and replace it.
How To Remove Filter From Maytag Dishwasher
1. Unplug the dishwasher from the power source.
2. Locate the filter. It is usually located at the bottom of the dishwasher.
3. Use a flat-head screwdriver to remove the screws that hold the filter in place.
4. Carefully pull the filter out of the dishwasher.
5. Clean the filter with warm, soapy water.
6. Rinse the filter thoroughly and allow it to air dry.
7. Reinstall the filter into the dishwasher and secure it with the screws.
8. Plug the dishwasher back into the power source.
Removing the filter from a Maytag dishwasher is a simple process. First, locate the filter in the bottom of the dishwasher. Then, remove the filter by twisting it counterclockwise and lifting it out. Once the filter is removed, it can be cleaned with a soft brush and warm, soapy water. After cleaning, the filter can be reinstalled by twisting it clockwise until it is firmly in place. With a few simple steps, the filter can be easily removed and cleaned.