Disassembling a Maytag dryer is a relatively simple process that can be completed in a few steps. Before beginning, it is important to unplug the dryer and make sure that all power sources are disconnected. Additionally, you should have a screwdriver and a pair of pliers on hand. Once you have the necessary tools, you can begin the process of disassembling your Maytag dryer.
First, you will need to remove the back panel of the dryer. This is typically held in place by several screws, which can be removed with a screwdriver. Once the screws are removed, the back panel can be gently pulled off.
How To Disassemble Maytag Dryer
1. Unplug the dryer from the wall outlet.
2. Remove the lint filter.
3. Remove the screws that hold the top panel in place.
4. Lift the top panel off the dryer.
5. Disconnect the wiring harness from the control panel.
6. Remove the screws that hold the control panel in place.
7. Lift the control panel off the dryer.
8. Remove the screws that hold the front panel in place.
9. Pull the front panel off the dryer.
10. Disconnect the door switch from the front panel.
11. Remove the screws that hold the drum in place.
12. Lift the drum out of the dryer.
13. Remove the screws that hold the blower wheel in place.
14. Remove the blower wheel.
15. Remove the screws that hold the motor
Disassembling a Maytag dryer is a relatively simple process. First, unplug the dryer from the wall outlet and then remove the lint screen. Next, remove the front panel and the top panel. Disconnect the wires and hoses from the back of the dryer and then remove the drum. Finally, unscrew the screws from the back of the dryer and remove the back panel. With the back panel removed, you can access the internal components of the dryer and complete the disassembly process.