Installing a belt on a Maytag dryer is a relatively simple process that can be completed in a few steps. Before beginning, make sure you have the correct belt for your model of Maytag dryer. You may also want to wear gloves and safety glasses to protect yourself.
To begin, unplug the dryer from the wall and move it away from the wall. Remove the back panel of the dryer to gain access to the interior. Once the back panel is removed, you will be able to see the motor and the drum.
Next, locate the idler pulley and the motor pulley. These are the two pulleys that the belt will go around. Remove the old belt from the pulleys. To do this, you may need to use a flat head screwdriver to loosen the tension on the idler pulley. Once the old belt is removed, you can install the new belt.
How To Install A Belt On A Maytag Dryer
1. Unplug the dryer from the wall outlet.
2. Remove the back panel of the dryer.
3. Remove the drum and any other components that may be blocking access to the belt.
4. Check the tension roller and idler pulley for any signs of wear or damage.
5. If the tension roller and idler pulley are in good condition, remove the old belt and replace it with the new belt.
6. Reinstall the drum and any other components that were removed.
7. Reattach the back panel.
8. Plug the dryer back into the wall outlet.
How To Install A Belt On A Maytag Dryer
Installing a belt on a Maytag dryer is a relatively straightforward process. First, you need to disconnect the power, remove the front panel, and then remove the old belt. Once the old belt is removed, you can install the new belt, making sure it is properly tensioned and aligned. Finally, you can reassemble the dryer and reconnect the power. With a few simple steps, you can easily install a new belt on your Maytag dryer.