If you have a Maytag refrigerator with an ice maker, you can manually start the ice maker by following a few simple steps. First, locate the ice maker shutoff switch on the back of the refrigerator. This switch should be in the “off” position. Next, locate the ice maker control arm. This arm should be in the “up” position. Now, turn the ice maker shutoff switch to the “on” position. Finally, push the ice maker control arm down to the “start” position. The ice maker should now start producing ice. If you have any difficulty starting the ice maker, refer to the owner’s manual for further instructions.
How To Manually Start Ice Maker In Maytag Refrigerator
1. Locate the On/Off switch for the ice maker. This switch is usually located near the ice maker itself, or on the side or back of the refrigerator.
2. Turn the switch to the “On” position.
3. Listen for the motor to start running. This sound indicates that the ice maker is now running.
4. Check the ice maker for ice cubes. If the ice maker has not produced any cubes after 24 hours, check the water line for kinks or blockages.
5. If the ice maker is still not producing ice, check the water pressure. If the water pressure is too low, the ice maker will not be able to produce ice cubes.
6. If the water pressure is adequate, check the temperature of the freezer. If the freezer temperature is too low, the ice maker will not produce ice cubes.
In conclusion, manually starting the ice maker in a Maytag refrigerator is a relatively simple process. First, make sure the ice maker is turned on. Then, locate the ice maker’s reset button, which is usually located underneath the ice maker. Press and hold the reset button for 3-5 seconds. Finally, wait a few minutes for the ice maker to start making ice. Following these steps should help you successfully start your Maytag refrigerator’s ice maker.