Welcome to the installation of your new Maytag MMV1174FZ 1.7 cu. ft. microwave. Before you begin, make sure you have all the necessary tools and materials. You will need a Phillips head screwdriver, a flathead screwdriver, a level, a drill, and mounting hardware.
Once you have gathered the necessary tools and materials, you can begin the installation process. First, locate a suitable spot for the microwave. Make sure the area is level and that the power outlet is within reach.
Next, attach the mounting bracket to the wall. Use the drill to secure the screws into the wall studs. Make sure the bracket is level before proceeding.
How To Install A Maytag Microwave Mmv1174Fz 1.7 Cu. ft. over-the-range microwave
1. Choose a location for the microwave that is level and close to a 120-volt, 15-amp dedicated circuit.
2. Remove the packaging and any protective materials from the microwave.
3. Place the mounting plate on the wall and mark the mounting holes.
4. Drill the mounting holes and insert the wall anchors.
5. Attach the mounting plate to the wall with the provided screws.
6. Place the microwave onto the mounting plate and secure it with the provided screws.
7. Connect the power cord to the wall outlet and the microwave.
8. Turn on the power and test the microwave.
Installing a Maytag microwave MMV1174FZ 1.7 cu ft is a relatively easy task that can be completed in a few simple steps. First, you will need to remove the old microwave and disconnect the power supply. Next, you will need to mount the new microwave to the wall and connect the power supply. Finally, you will need to secure the microwave to the wall and plug it in. Following these steps should ensure that your new Maytag microwave is safely and securely installed.