Replacing the spring for the latches on your Maytag microwave door can be a daunting task. But with the right tools and a bit of patience, you can get the job done in no time. Before you begin, make sure you have the right replacement spring for your model and that you have all the necessary tools. This guide will walk you through the steps of popping out the Maytag microwave door and replacing the spring for the latches.
How To Pop Out Maytag Microwave Door To Replace Spring For Latches
1. Unplug the microwave from the electrical outlet.
2. Remove the screws that secure the outer frame of the microwave to the cabinet.
3. Carefully slide the outer frame of the microwave away from the cabinet.
4. Locate the two latches that hold the microwave door closed.
5. Unscrew the screws that secure the latches to the microwave door.
6. Remove the old springs from the latches.
7. Insert the new springs into the latches.
8. Secure the latches to the microwave door with the screws.
9. Slide the outer frame of the microwave back onto the cabinet and secure it with the screws.
10. Plug the microwave back into the electrical outlet.
In conclusion, the process of replacing the spring for the latches on a Maytag microwave door is relatively simple. First, you need to remove the screws that hold the door in place. Then, you need to remove the door panel and the latch assembly. After that, you can remove the spring and replace it with a new one. Finally, you can reassemble the door and latch assembly and reinstall the screws. With the right tools and a bit of patience, you can easily pop out your Maytag microwave door and replace the spring for the latches.