Title: Kenmore Washer 110.2002201 Won’t Drain
Hey there! Are you facing a frustrating situation where your trusty Kenmore Washer 110.2002201 refuses to drain? Don’t worry, you’re not alone. Many homeowners have encountered this issue, and in this blog post, we’ll dive into the possible causes and solutions to get your washer back up and running smoothly. So, grab a cup of coffee, sit back, and let’s troubleshoot together!
Understanding the Problem
Before we jump into troubleshooting, let’s understand why your Kenmore Washer 110.2002201 might be refusing to drain. There could be several reasons behind this issue, such as a clogged drain hose, a faulty drain pump, or even a malfunctioning lid switch. It’s essential to identify the root cause to ensure we address it effectively.
Troubleshooting Steps
1. Check the Drain Hose
The first step is to inspect the drain hose connected to your washer. Sometimes, debris or lint can clog the hose, preventing proper drainage. Unplug the washer and locate the drain hose at the back. Disconnect it and inspect for any blockages. If you find any, clear them out gently using a pipe cleaner or a small brush.
2. Examine the Drain Pump
Next, let’s take a look at the drain pump. This pump is responsible for removing water from the washer during the drain cycle. Start by locating the pump, which is usually found at the bottom of the machine. Check for any visible signs of damage or blockages. If you spot anything, clean it out carefully. If the pump appears to be faulty, it might need to be replaced.
3. Test the Lid Switch
The lid switch plays a crucial role in the draining process. It ensures that the washer won’t drain if the lid is open, preventing any accidents. To check if the lid switch is causing the problem, open and close the lid firmly. If you don’t hear a clicking sound, the switch might be faulty and needs to be replaced.
4. Inspect the Drain Filter
In some cases, a clogged drain filter can be the culprit behind the drainage issue. The drain filter is located near the bottom of the washer, usually behind a small access panel. Remove the panel and carefully unscrew the filter. Clean it thoroughly, removing any debris or lint that might have accumulated. Once cleaned, reattach the filter and secure the access panel.
5. Verify the Water Level Control Switch
Another component that can affect drainage is the water level control switch. This switch determines the appropriate water level for each cycle. If it malfunctions, the washer may not drain properly. To check if the switch is causing the problem, locate it near the top of the machine and gently blow into the small tube connected to it. You should hear a clicking sound. If not, the switch might need to be replaced.
6. Check for Pump Belt Issues
In some cases, a loose or broken pump belt can hinder the draining process. To inspect the pump belt, unplug the washer and remove the back panel. Look for the belt that connects the motor to the pump. If it appears loose or damaged, it’s time to replace it with a new one.
7. Consider the Drain Pump Impeller
The drain pump impeller is responsible for pushing water out of the washer. Over time, it can get clogged with debris, affecting the drainage process. To address this, unplug the washer, locate the drain pump, and remove it from the machine. Check the impeller for any blockages and clean it thoroughly. Once cleaned, reassemble the pump and test the washer.
8. Seek Professional Help
If you have followed all the steps above and your Kenmore Washer 110.2002201 still won’t drain, it might be time to seek professional assistance. A certified technician will have the expertise to diagnose and fix the issue effectively. Don’t hesitate to contact Kenmore’s customer support or schedule a service appointment.
Conclusion
Dealing with a Kenmore Washer 110.2002201 that won’t drain can be frustrating, but with the troubleshooting steps mentioned above, you should be well on your way to resolving the issue. Remember, it’s essential to identify the root cause and address it accordingly. Whether it’s a clogged drain hose, a faulty pump, or a malfunctioning switch, you now have the knowledge to tackle the problem head-on. Good luck, and may your washer soon be back to its efficient, water-draining self!