If you own a Maytag microwave, you may need to reset the filter from time to time. Resetting the filter is a simple process that can be done in just a few steps. This guide will walk you through the process of resetting your Maytag microwave filter.
First, locate the filter on the bottom of the inside of your microwave. It should be a small, rectangular panel that can be easily removed. Once you have located the filter, remove it by pressing in the sides and pulling it out.
Next, inspect the filter to make sure it is not clogged with dirt or debris. If it is, use a damp cloth to wipe the filter clean. Once the filter is clean, place it back into the microwave and press it firmly until it clicks into place.
Finally, press the reset button on the inside of the microwave. This will reset the filter and allow it to start working again. You may need to repeat this
How To Reset Maytag Microwave Filter
To reset a Maytag microwave filter, press and hold the “Filter Reset” button on the control panel for 3 seconds or until the light above the button turns off. This will reset the filter and allow the microwave to operate normally.
How To Reset Maytag Microwave Filter
1. Unplug the microwave from the wall outlet.
2. Remove the screws that hold the microwave vent grille in place.
3. Pull the vent grille away from the microwave.
4. Locate the filter behind the vent grille.
5. Remove the filter and discard it.
6. Insert a new filter into the same position.
7. Replace the vent grille and secure it with the screws.
8. Plug the microwave back into the wall outlet.
In conclusion, resetting the Maytag microwave filter is a simple and straightforward process that requires minimal effort. All you need to do is locate the filter, remove it from the microwave, clean it with warm soapy water, and then reinstall it back in the microwave. Once the filter is reinstalled, you can reset the filter light by pressing the reset button on the microwave. Following these steps will ensure that your Maytag microwave filter is working properly and will help to extend the life of your appliance.