SUD stands for “Suds Lock” and is an indication that your Maytag washer has detected too many suds in the wash cycle. This is a safety feature that is designed to protect the washer from over-sudsing, which can cause damage to the washer and lead to poor washing performance. It is important to note that SUD does not indicate a problem with the washer, but rather a need to reduce the amount of detergent used in the wash cycle.
What Does Sud Mean On Maytag Washer
SUD stands for “suds lock”. This is a feature on some Maytag washers that prevents the washer from spinning if it detects an excessive amount of suds in the wash.
Suggested: Where Is The Coin Trap On A Maytag Washer
What Does Sud Mean On Maytag Washer
1. Check the Owner’s Manual: The owner’s manual for your Maytag washer should provide information on what the “Sud” error code means.
2. Check the Drain Hose: Make sure the drain hose is not clogged or kinked.
3. Clean the Filter: Clean the filter on the washer to remove any debris or lint that may be blocking the flow of water.
4. Check the Water Pressure: Make sure the water pressure is adequate for the washer.
5. Check for Leaks: Check for any leaks in the hoses or connections.
6. Reset the Washer: Unplug the washer and plug it back in after a few minutes. This will reset the washer and may clear the “Sud” error code.
The “SUD” error code on a Maytag washer indicates that there is too much suds in the washer. This is usually caused by an excessive amount of detergent being used or the wrong type of detergent being used. To resolve this issue, reduce the amount of detergent used or switch to a low-sudsing detergent. If the problem persists, contact a qualified technician for assistance.