Changing the belt on a Maytag washer is a relatively simple task that can be completed in a few steps. Before starting, you will need to purchase a new belt that is compatible with your Maytag washer. You will also need a few basic tools such as a screwdriver, pliers, and a ratchet. Once you have the necessary tools and parts, you can begin the process.
First, you will need to disconnect the power to the washer. This can be done by unplugging the power cord from the wall outlet. Once the power is disconnected, you can remove the access panel from the back of the washer. This will give you access to the belt and pulley system.
Next, you will need to remove the old belt from the pulley system. This can be done by using the ratchet to loosen the tension on the belt and then sliding the belt off the pulleys.
How To Change Belt On Maytag Washer
1. Unplug the washer from the wall outlet.
2. Remove the access panel from the back of the washer.
3. Locate the belt and remove it from the motor pulley and the drive pulley.
4. Install the new belt by looping it around the motor pulley and the drive pulley.
5. Tighten the belt by pulling it in the direction of the motor pulley.
6. Replace the access panel.
7. Plug the washer back into the wall outlet.
How To Change Belt On Maytag Washer
Changing the belt on a Maytag washer is a relatively simple task that can be completed in a few steps. First, you must unplug the washer and remove the front panel. Next, you should remove the old belt, and then install the new belt by looping it around the motor pulley and the drive pulley. Finally, you should reassemble the washer and plug it back in. With these steps, you should be able to easily replace the belt on your Maytag washer.