If you are experiencing a long-lasting issue with your Maytag washer, such as an error code, it is important to know how to clear the code. Clearing the code can help you troubleshoot the issue and get your washer running again. This guide will explain how to clear the code on a Maytag washer.
First, you will need to unplug the washer from the power source. This is to ensure that the washer is completely powered off and that no electricity is running through the machine. Once the washer is unplugged, you can then press and hold the “Start/Pause” button for five seconds. This will reset the washer and clear any codes that may be present.
After the code is cleared, you can then plug the washer back in and attempt to run a cycle. If the issue persists, it is recommended to contact a qualified technician for further assistance.
How To Clear Lf Code On Maytag Washer
To clear the LF code on a Maytag washer, unplug the washer from the power source and wait for at least 30 seconds. Then plug the washer back in and restart the cycle. If the code persists, check the water supply hoses for any kinks or blockages. If the hoses are clear, then the pressure switch may need to be replaced.
How To Clear Lf Code On Maytag Washer
1. Unplug the washer from the power source.
2. Open the washer lid and remove any clothing or other items from the washer.
3. Press and hold the START/PAUSE button for 5 seconds.
4. Turn the cycle selector knob to the OFF position.
5. Close the washer lid and plug the washer back into the power source.
6. Turn the cycle selector knob to the desired cycle.
7. Press the START/PAUSE button to begin the cycle.
In conclusion, clearing the LF code on a Maytag washer is a relatively simple process. First, unplug the washer, then press and hold the Start/Pause button for five seconds. After that, plug the washer back in and press the Start/Pause button once to reset the washer. This should clear the LF code and allow the washer to continue functioning properly.