Title: Maytag Dryer Med3500Fw0 Won’t Stop
Have you ever experienced the frustration of a dryer that just won’t stop running? It can be maddening, especially when you have a million other things to do. In this blog post, we’ll explore the common reasons why your Maytag dryer Med3500Fw0 won’t stop and provide you with some practical solutions to get it back to its normal functioning. So, let’s dive in and uncover the secrets behind this perplexing issue!
1. The Timer Is Faulty
One of the most common reasons why your Maytag dryer Med3500Fw0 won’t stop is a faulty timer. The timer is responsible for controlling the duration of the drying cycle, and if it malfunctions, it may not send the signal to stop the dryer. To check if the timer is the culprit, try manually advancing it through the different settings. If the dryer stops when you reach the off position, then you’ll need to replace the timer.
2. The Moisture Sensor Is Dirty
Another possible reason for your Maytag dryer’s never-ending operation is a dirty moisture sensor. The moisture sensor detects the level of moisture in the clothes and signals the dryer to stop once they are dry. However, if the sensor is coated with lint or residue, it may not accurately detect the moisture level, causing the dryer to keep running. To clean the sensor, locate it inside the dryer drum and gently wipe it with a soft cloth or sponge. Ensure it is dry before testing the dryer again.
3. The Cycling Thermostat Is Defective
A defective cycling thermostat can also be the culprit behind your Maytag dryer’s refusal to stop. The cycling thermostat is responsible for regulating the temperature inside the dryer. When it fails, it may not signal the dryer to stop, leading to continuous operation. To check if the cycling thermostat is defective, use a multimeter to test its continuity. If it doesn’t show any continuity, you’ll need to replace it.
4. The Start Switch Is Stuck
Sometimes, a stuck start switch can cause your Maytag dryer to keep running. The start switch is usually located on the control panel and is responsible for initiating the drying cycle. If it gets stuck in the “on” position, the dryer will continue to run even after the cycle is complete. To fix this issue, try gently tapping the start switch to release it. If that doesn’t work, you may need to replace the switch.
5. The Door Switch Is Faulty
A faulty door switch can also be a reason why your Maytag dryer won’t stop. The door switch is designed to prevent the dryer from operating when the door is open. If it malfunctions and fails to detect that the door is closed, the dryer will continue to run indefinitely. To test if the door switch is the problem, open the dryer door and press the switch manually. If the dryer stops, you’ll need to replace the door switch.
6. The Control Board Is Malfunctioning
In some cases, a malfunctioning control board can cause your Maytag dryer to keep running. The control board is the brain of the dryer, responsible for interpreting the user’s commands and controlling various functions. If it develops a glitch or a component fails, it may not send the signal to stop the dryer. To determine if the control board is at fault, consult a professional technician who can diagnose and repair the issue.
Conclusion:
Dealing with a Maytag dryer Med3500Fw0 that won’t stop can be a frustrating experience. However, by understanding the potential causes behind this issue, you can take the necessary steps to resolve it. Whether it’s a faulty timer, dirty moisture sensor, defective cycling thermostat, stuck start switch, faulty door switch, or malfunctioning control board, there are solutions available. Remember to consult the user manual or seek professional help if needed. With a little troubleshooting and some handy tips, you’ll soon have your Maytag dryer back to its efficient and reliable self.