If you have a Maytag washer with a lid lock, you may find yourself in a situation where you need to bypass the lid lock. This can be done in a few simple steps. First, locate the lid lock switch on the outside of the washer. This switch is usually located near the lid or on the side of the washer. Once you have located the switch, use a flathead screwdriver to press the switch in and hold it for a few seconds. This will release the lid lock and allow you to open the lid of the washer. If the switch does not work, you may need to remove the lid of the washer and manually disengage the lid lock. This can be done by removing the screws that hold the lid in place and then manually disengaging the lid lock. Once the lid lock is disengaged, you can open the lid and access the interior of the washer.
Favorite: How Do I Check My Warranty On My Maytag Washer
How To Bypass Lid Lock On Maytag Washer
Unfortunately, it is not possible to bypass the lid lock on a Maytag washer. The lid lock is an important safety feature that prevents the washer from operating when the lid is open. If the lid lock is malfunctioning, it should be serviced or replaced by a qualified technician.
Suggested: What Does Soil Level Mean On Maytag Washer
How To Bypass Lid Lock On Maytag Washer
1. Unplug the washer from the wall outlet.
2. Locate the lid lock switch on the washer.
3. Use a flathead screwdriver to gently pry the lid lock switch out of the washer.
4. Remove the two screws that hold the lid lock switch in place.
5. Pull the lid lock switch out of the washer.
6. Use a pair of needle-nose pliers to disconnect the wiring harness from the lid lock switch.
7. Reconnect the wiring harness to the lid lock switch.
8. Reinstall the lid lock switch and two screws.
9. Plug the washer back into the wall outlet.
10. Test the washer to make sure the lid lock is bypassed.
Recommended: How To Remove The Top Of A Maytag Washing Machine
In conclusion, the best way to bypass the lid lock on a Maytag washer is to unplug the washer from the power source, remove the top panel, and locate the lid lock switch. Once the switch is located, you can use a flathead screwdriver to push the switch into the off position. This will allow you to open the lid and access the washer’s interior. It is important to remember that this process should only be used as a last resort, as it may void the warranty of the washer.