How To Dissamble Lg Dehumidifier

If you need to disassemble an LG dehumidifier, the process is relatively straightforward. First, make sure the device is unplugged and the power switch is in the off position. Then, remove the front panel of the dehumidifier by unscrewing the screws on the back. Once the panel is removed, you should be able to access the internal components. To remove the fan and motor, unscrew the screws that secure them in place. You can then remove the fan and motor from the unit. To remove the water reservoir, unscrew the screws that secure it to the unit. Once the reservoir is removed, you can access the condenser and evaporator coils. To remove the coils, unscrew the screws that secure them in place. Finally, you can remove the remaining components, such as the control board and wiring. With the components removed, you can now clean and inspect them for any damage.

 

How To Dissamble Lg Dehumidifier

1. Unplug the dehumidifier from the power source.

2. Remove the screws from the back panel of the dehumidifier.

3. Carefully remove the back panel and set it aside.

4. Remove the screws from the top panel of the dehumidifier.

5. Carefully remove the top panel and set it aside.

6. Disconnect the wiring harness from the fan motor.

7. Remove the screws from the fan motor and lift it out of the dehumidifier.

8. Remove the screws from the evaporator coil and lift it out of the dehumidifier.

9. Disconnect the wiring harness from the control board.

10. Remove the screws from the control board and lift it out of the dehumidifier.

11. Remove the screws from the condenser coil and lift it out of the dehumidifier.

In conclusion, disassembling an LG dehumidifier is a relatively simple process that can be done in a few easy steps. First, unplug the dehumidifier and remove the front panel. Next, remove the screws that secure the fan assembly and evaporator coils. Finally, remove the fan assembly and evaporator coils from the dehumidifier. With these steps, you can easily disassemble your LG dehumidifier and have it ready for repair or maintenance.