Title: Whirlpool Washer WFW6620HW0 Won’t Agitate
Hey there! Are you facing a frustrating issue with your Whirlpool washer, model WFW6620HW0? Don’t worry; you’re not alone! In this blog post, we’ll dive into the common problem of a Whirlpool washer that won’t agitate. We’ll explore the possible causes and provide you with some troubleshooting tips to get your washer back up and running smoothly. So, let’s roll up our sleeves and get started!
1. Understanding the Agitation Process
Before we jump into troubleshooting, let’s quickly understand what agitation is and why it’s essential in a washing machine. Agitation is the back-and-forth motion of the washer drum, which helps to loosen dirt and stains from your clothes. It’s a crucial step in the cleaning process.
2. Check the Power Supply
The first thing you should do when your Whirlpool washer won’t agitate is to check the power supply. Ensure that the washer is properly plugged into a working electrical outlet. Sometimes, a loose connection or a tripped circuit breaker can cause the washer to stop agitating.
3. Examine the Lid Switch
The lid switch is a safety feature that prevents the washer from agitating when the lid is open. If the lid switch is faulty or not making proper contact, it can cause the washer to stop agitating. Carefully inspect the lid switch and ensure that it’s functioning correctly. If necessary, replace the lid switch.
4. Inspect the Drive Belt
The drive belt is responsible for transferring power from the motor to the washer drum. Over time, the belt can become worn or stretched, resulting in a loss of agitation. Inspect the drive belt for any signs of damage or wear. If you notice any issues, replace the drive belt with a new one.
5. Check the Motor Coupling
The motor coupling connects the motor to the transmission. If the motor coupling is broken or worn out, the washer won’t agitate. Inspect the motor coupling for any signs of damage. If it’s damaged, replace it with a new one to restore agitation.
6. Test the Motor
A malfunctioning motor can also cause the washer to stop agitating. To test the motor, disconnect the power supply and remove the washer’s back panel. Check for any loose connections or burnt wires. If everything looks fine, use a multimeter to test the motor’s continuity. If the motor fails the continuity test, it may be defective and need to be replaced.
7. Check the Control Board
The control board is the brain of your washer, responsible for controlling various functions, including agitation. A faulty control board can disrupt the agitation process. Inspect the control board for any visible signs of damage or burnt components. If necessary, replace the control board.
8. Clean the Water Inlet Valve
A clogged water inlet valve can prevent the washer from agitating. Sediments and debris can accumulate over time, hindering the water flow. Turn off the water supply and disconnect the hoses from the valve. Clean the valve using a soft brush and vinegar to remove any blockages. Reconnect the hoses and turn on the water supply.
9. Inspect the Pressure Switch
The pressure switch monitors the water level in the washer. If the pressure switch is faulty, it may not send the proper signals to the control board, resulting in no agitation. Check the pressure switch for any signs of damage or blockage. If necessary, replace the pressure switch.
10. Consider Overloading
Overloading the washer with too many clothes can strain the motor and prevent proper agitation. Make sure you’re not exceeding the recommended load capacity for your Whirlpool washer. Remember, it’s better to do multiple smaller loads than one big, overloaded load.
11. Contact Whirlpool Customer Support
If you’ve tried all the troubleshooting steps mentioned above and your Whirlpool washer still won’t agitate, it’s time to reach out to Whirlpool’s customer support. They have a team of experts who can provide further assistance and guide you through the repair process.
Conclusion:
There you have it – a comprehensive guide to troubleshooting a Whirlpool washer, model WFW6620HW0, that won’t agitate. By following these steps, you can identify and resolve the issue, getting your washer back to its efficient cleaning performance. Remember, if you’re unsure or uncomfortable with any of the troubleshooting steps, it’s always best to seek professional help. Happy washing!