Title: Whirlpool Washer WFW85HEFW1 Won’t Drain
Hey there! Are you facing a frustrating situation with your Whirlpool washer model WFW85HEFW1? Is it refusing to drain water? Don’t worry, we’ve got you covered! In this blog post, we’ll explore some common reasons why your Whirlpool washer won’t drain and provide you with practical solutions to get your laundry routine back on track. So, let’s dive right in!
Understanding the Problem:
You’ve loaded your washer with a pile of dirty clothes, set the desired cycle, and eagerly awaited the fresh and clean outcome. But alas, when the cycle completes, you open the door only to find standing water in the drum. What could be causing this frustrating issue? Let’s find out!
1. Clogged Drain Hose:
One of the most common culprits behind a Whirlpool washer’s drainage problem is a clogged drain hose. Over time, debris, lint, and small objects can accumulate in the hose, obstructing the water flow. To check if this is the issue, follow these steps:
– Turn off the washer and unplug it from the power source.
– Locate the drain hose at the back of the machine.
– Remove the hose and inspect it for any blockages.
– If clogged, use a long, flexible brush or a pipe cleaner to remove the debris.
– Reattach the hose securely and test the washer.
2. Faulty Drain Pump:
Another possible reason for your washer not draining could be a malfunctioning drain pump. The drain pump is responsible for removing water from the machine during the drain cycle. If it’s not working correctly, water will remain in the drum. Here’s what you can do:
– Unplug the washer and access the drain pump, usually located at the bottom front or back of the machine.
– Check for any visible signs of damage or blockages.
– If you find debris, carefully remove it and clean the pump.
– If the pump appears to be faulty, it may need to be replaced. Consult a professional technician for assistance.
3. Clogged Filter:
Whirlpool washers often have a filter that prevents larger objects from entering the drain pump. If this filter becomes clogged, it can restrict water flow and cause drainage issues. Here’s how you can address this:
– Locate the filter, usually located behind a small access panel on the front or bottom of the machine.
– Place a towel or bucket beneath the filter to catch any water that may spill out.
– Unscrew the filter and carefully remove any debris or dirt.
– Clean the filter thoroughly and reattach it securely.
4. Improper Installation of Drain Hose:
Sometimes, a simple installation error can lead to drainage problems. Ensure that the drain hose is properly connected to the machine and that it is positioned at the correct height. If the hose is positioned too low, water may not drain effectively. Adjust the hose height if necessary and secure it tightly.
5. Pump Impeller Blockage:
The pump impeller is responsible for creating the necessary pressure to drain water from the washer. However, it can become blocked by small objects or debris, hindering its performance. Follow these steps to address this issue:
– Unplug the washer and locate the pump impeller, usually found near the drain pump.
– Carefully remove any visible blockages using a pair of tweezers or a small brush.
– Gently rotate the impeller to ensure it moves freely.
– Reassemble the washer and test it.
Conclusion:
Dealing with a Whirlpool washer that won’t drain can be frustrating, but with these troubleshooting tips, you can quickly identify and resolve the issue. Remember to check for a clogged drain hose, inspect the drain pump and filter, ensure proper installation of the drain hose, and clear any blockages in the pump impeller. If the problem persists, it’s best to seek professional assistance to avoid further damage. Don’t let a clogged washer drain dampen your laundry spirits – get it fixed and enjoy fresh, clean clothes once again!