Title: Whirlpool Washer WFW9150WW01 Won’t Drain
Hey there! Are you facing a frustrating situation where your Whirlpool washer model WFW9150WW01 is refusing to drain? Don’t worry, we’ve got you covered! In this blog post, we’ll guide you through some troubleshooting steps to help you get your washer back up and running smoothly. So, let’s dive right in and get that drain issue fixed!
Understanding the Importance of a Properly Functioning Drain:
Before we jump into the troubleshooting, let’s take a moment to understand why a properly functioning drain is crucial for your washer. The drain system plays a vital role in removing dirty water from the machine after each cycle. If the drain is clogged or malfunctioning, it can lead to water pooling inside the washer, causing potential damage and unpleasant odors. So, let’s get to the bottom of this issue!
1. Check for Obstructions:
The first step is to check for any obstructions in the drain hose or pump. Start by unplugging the washer and locating the drain hose at the back. Remove the hose and inspect it for any clogs, twists, or kinks. If you find any blockages, clear them using a long, flexible brush or by running water through the hose.
2. Inspect the Drain Pump:
Next, we’ll examine the drain pump. The pump is responsible for removing water from the washer. To access it, you’ll need to remove the front panel. Once the panel is off, locate the drain pump and inspect it for any debris or foreign objects. Clear out any obstructions you find and ensure the impeller can spin freely.
3. Check the Drain Filter:
Many Whirlpool washers, including the WFW9150WW01, have a drain filter that can become clogged over time. Locate the filter, which is usually located at the bottom front of the washer, behind a small access panel. Remove the filter and clean it thoroughly, removing any lint, debris, or residue that may have accumulated.
4. Verify the Drain Hose Height:
The height of the drain hose can also affect the draining process. Ensure that the hose is not positioned too low or too high. Ideally, the drain hose should be positioned at a height of 39-96 inches from the floor. Adjust the height if necessary to allow for proper drainage.
5. Check the Drain Pump Motor:
If you’ve followed the previous steps and the issue persists, it’s time to check the drain pump motor. Using a multimeter, test the motor for continuity. If the motor fails the test, it may need to be replaced. Consult a professional technician if you’re unsure about performing this step yourself.
6. Call for Professional Assistance:
If you’ve exhausted all the troubleshooting steps and your Whirlpool washer WFW9150WW01 still won’t drain, it’s time to seek professional help. Contact a certified Whirlpool technician who can diagnose and repair the issue accurately.
Conclusion:
Dealing with a Whirlpool washer WFW9150WW01 that won’t drain can be a frustrating experience. However, by following the troubleshooting steps outlined in this article, you can increase your chances of resolving the issue on your own. Remember to check for obstructions, inspect the drain pump and filter, verify the drain hose height, and test the drain pump motor if necessary. If all else fails, don’t hesitate to contact a professional technician for assistance. Soon enough, you’ll have your washer back to its efficient self, ensuring clean and fresh laundry every time!