If you have an LG ThinQ refrigerator with a water filter, you may need to reset the filter periodically to ensure that it is functioning properly. Resetting the water filter on an LG ThinQ refrigerator is a simple process that requires only a few steps. This guide will walk you through the steps necessary to reset the water filter on an LG ThinQ refrigerator.
First, locate the water filter indicator light on the refrigerator. This light will be located near the water filter and will be either green or red. If the light is green, the filter is working properly and does not need to be reset.
If the light is red, the filter needs to be reset. To do this, press and hold the reset button on the filter for 3 seconds. The light should then turn green, indicating that the filter has been reset. Finally, press the reset button again to confirm that the filter has been reset. If you need to purchase a new LG refrigerator water filter, you can purchase one from Amazon here.
How To Reset Water Filter On Lg Thinq Refrigerator
To reset the water filter on your LG ThinQ refrigerator, you will need to locate the reset button on the filter. This button is usually located on the bottom of the filter, or on the side. Once you have located the reset button, press and hold it for 3 seconds. The filter indicator light should then flash to indicate that the filter has been reset.
How To Reset Water Filter On Lg Thinq Refrigerator
1. Turn off the water supply to the refrigerator.
2. Locate the filter cartridge in the refrigerator.
3. Unscrew the filter cartridge and remove it from the refrigerator.
4. Inspect the filter cartridge for any signs of damage or clogs.
5. If the filter cartridge is damaged or clogged, replace it with a new one.
6. Reinstall the filter cartridge in the refrigerator.
7. Turn on the water supply to the refrigerator.
8. Run the water for several minutes to flush out any air bubbles.
9. Check for any leaks from the filter cartridge.
10. Reset the filter indicator light on the refrigerator.
In conclusion, resetting the water filter on an LG ThinQ refrigerator is a simple process. First, locate the filter reset button on the front of the refrigerator. Then, press and hold the button for three seconds. Finally, wait for the filter light to turn green, indicating that the filter has been reset. Following these steps will ensure that your refrigerator is running efficiently and providing clean, filtered water.