If you have an LG refrigerator with a water filter, you may need to reset the filter after replacing it. Resetting the filter is a simple process that can be done in a few steps. This guide will walk you through the process of resetting the water filter on your LG refrigerator.
First, locate the filter reset button. This button is typically located on the inside of the refrigerator, near the water filter. It may be labeled “Filter Reset” or “Reset Filter”.
How To Reset Water Filter On Lg Refrigerator
To reset the water filter on an LG refrigerator, press and hold the Reset Filter button for 3 seconds. The button is usually located in the upper right corner of the refrigerator interior.
How To Reset Water Filter On Lg Refrigerator
1. Unplug your refrigerator and turn off the water supply to the refrigerator.
2. Locate the water filter housing in the back or on the side of the refrigerator.
3. Unscrew the filter housing and remove the filter.
4. Inspect the filter for any damage or clogs.
5. Replace the filter with a new one and make sure it is firmly seated in the filter housing.
6. Re-screw the filter housing and turn on the water supply to the refrigerator.
7. Plug the refrigerator back in and run water through the dispenser for several minutes to flush the system.
The process of resetting a water filter on an LG refrigerator is simple and straightforward. All you need to do is locate the filter reset button, press and hold it for three seconds, and then release it. After the reset is complete, the filter indicator light should turn off. If the indicator light does not turn off, then the reset was unsuccessful and you may need to repeat the process. Once the filter reset is successful, you can continue to enjoy the clean and filtered water from your LG refrigerator.