If you have a Samsung air conditioner and are looking to change its thermistor, then you have come to the right place. The thermistor, or temperature sensor, is an important part of your air conditioner, as it helps to regulate the temperature of the air that is being cooled. In this guide, we will walk you through the steps needed to replace the thermistor in your Samsung air conditioner with the DB95-01934A model. We will cover what tools you will need, how to remove the old thermistor, and how to install the new one. Let’s get started!
How Can Change Samsung Air Conditioner Thermistor Db95-01934A
1. Turn off the power to the air conditioner at the circuit breaker.
2. Remove the front cover of the air conditioner.
3. Locate the thermistor on the evaporator coil.
4. Unplug the thermistor from the control board.
5. Install the new thermistor in the same location.
6. Plug the new thermistor into the control board.
7. Replace the front cover of the air conditioner.
8. Turn on the power to the air conditioner at the circuit breaker.
Samsung air conditioner thermistor DB95-01934A can be changed by replacing the thermistor with a new one. This can be done by disconnecting the power to the air conditioner, removing the old thermistor, and then connecting the new thermistor. It is important to ensure that the new thermistor is compatible with the air conditioner before installation. With the proper installation, the new thermistor should provide accurate temperature readings and improved performance.