Removing the Flex Zone Drawer from your Viking Refrigerator is a relatively simple process. With the right tools and a bit of patience, you can have the drawer out in no time. Before you begin, make sure to unplug the refrigerator from the power source and move it away from the wall to ensure you have enough room to work. Once you have the refrigerator in an accessible area, you can begin to remove the Flex Zone Drawer.
How To Remove Flex Zone Drawer From Viking Refrigerator
Removing the Flex Zone Drawer from a Viking Refrigerator is a relatively simple process. First, locate the drawer at the bottom of the refrigerator and remove the two screws that secure it in place. Next, carefully slide the drawer out of the refrigerator and set aside. Finally, disconnect the power cord from the back of the drawer and remove it from the refrigerator. Once the drawer is removed, it can be cleaned and replaced as needed.
How To Remove Flex Zone Drawer From Viking Refrigerator
1. Unplug the refrigerator from the power source.
2. Open the refrigerator door and locate the Flex Zone drawer.
3. Pull the drawer out as far as it will go and then press the release button located on the left side of the drawer.
4. Pull the drawer out completely and set it aside.
5. Disconnect the power cord from the back of the drawer.
6. Remove the screws that are holding the drawer in place.
7. Lift the drawer out of the refrigerator and set it aside.
8. Plug the refrigerator back into the power source.
Removing the Flex Zone drawer from a Viking refrigerator is a relatively simple process. First, you should make sure the refrigerator is unplugged and the water supply is turned off. Then, you should remove the screws that hold the Flex Zone drawer in place. Finally, you should carefully pull the drawer out of the refrigerator. With these steps, you should be able to easily remove the Flex Zone drawer from your Viking refrigerator.