If your Electrolux dryer won’t start, there are a few steps you can take to troubleshoot the problem and get your dryer running again. First, check the power cord and plug to make sure everything is connected properly. Make sure the power switch is in the “on” position and the dryer is receiving power. If the power cord and plug are secure, then check the door switch and door latch to make sure they are in the correct position. If these are all functioning properly, then the problem may be with the thermal fuse. This is a safety device that can be reset if it has tripped. If the thermal fuse is the problem, you can reset it by unplugging the dryer and removing the back panel. Once the panel is removed, locate the thermal fuse and press the reset button. Once the thermal fuse is reset, replace the back panel and plug in the dryer.
How To Fix Electrolux Dryer That Wont Start
If your Electrolux dryer won’t start, there are several possible causes and solutions. First, check the power cord for any damage or loose connections. If the power cord is okay, then check the circuit breaker or fuse box to make sure the dryer is getting power. If it is, then check the door switch and timer for any damage or loose connections. If those are okay, then check the thermal fuse and heating element for any damage or loose connections. If all of these components are okay, then the problem may be with the motor or control board. If the motor is okay, then the control board may need to be replaced. If the motor is not working, then it may need to be replaced. Once all of these components have been checked, the dryer should be ready to use.
How To Fix Electrolux Dryer That Wont Start
1. Check the power cord and wall outlet – Make sure the power cord is firmly plugged into the wall outlet and that the outlet is receiving power.
2. Check the door switch – Make sure the door is closed securely and that the door switch is working properly.
3. Check the start button – Make sure the start button is being pressed firmly and that it is not stuck.
4. Check the thermal fuse – If the thermal fuse has blown, it will need to be replaced.
5. Check the timer – Make sure the timer is set correctly and that it is not stuck in the off position.
6. Check the heating element – If the heating element is not working, it will need to be replaced.
7. Check the drive belt – If the drive belt is worn or broken, it will need to be replaced.
8. Check the drum
In conclusion, if your Electrolux dryer won’t start, the most likely culprit is a faulty start switch, thermal fuse, or timer. To fix the issue, you’ll need to replace the faulty part, or take the dryer to a professional repair service. If the problem is more serious, such as a faulty motor or control board, then you may need to replace the entire dryer.