Removing shipping bolts from a Samsung washer is an important step in the installation process. Shipping bolts are designed to keep the washer stable during shipping and must be removed before the washer can be used. This guide will provide step-by-step instructions on how to safely and correctly remove the shipping bolts from your Samsung washer.
First, locate the shipping bolts on the back of the washer. There should be two bolts, one on each side of the washer.
Next, use a Phillips head screwdriver to remove the bolts. Turn the screwdriver counterclockwise to loosen the bolts. Once the bolts are loose, remove them completely.
Finally, inspect the area where the shipping bolts were located and make sure that all components are in place. Once all components are in place, your Samsung washer is ready to use.
How To Remove Shipping Bolts From Samsung Washer
1. Unplug the power cord from the wall outlet.
2. Turn off the water supply to the washer.
3. Remove the screws that secure the back panel of the washer to the frame.
4. Lift the back panel off the washer and set aside.
5. Locate the shipping bolts on the back of the washer.
6. Use a wrench or pliers to loosen the shipping bolts.
7. Remove the shipping bolts from the washer.
8. Replace the back panel and secure with the screws.
9. Turn on the water supply to the washer.
10. Plug the power cord back into the wall outlet.
How To Remove Shipping Bolts From Samsung Washer
Removing shipping bolts from a Samsung washer is a straightforward process. First, locate the shipping bolts on the back of the washer. Then, use a socket wrench to loosen and remove the bolts. Finally, store the bolts in a safe place for future use. With the shipping bolts removed, the washer is now ready for use.