If you’re having trouble with your Samsung washer and it’s displaying a DC code, don’t worry! This guide will help you troubleshoot and fix the issue. First, make sure that the power cord is securely plugged into the wall outlet and that the outlet is providing power. Then, check the wiring harnesses and connections between the control board and the motor. If they are loose or damaged, they will need to be replaced. If the wiring is okay, then you should check the motor for any signs of damage or wear. If the motor is damaged, it will need to be replaced. Finally, if all else fails, you can reset the control board by unplugging the washer and waiting for 30 seconds before plugging it back in. This should reset the control board and hopefully fix the DC code.
How To Fix Dc Code On Samsung Washer
If your Samsung washer is displaying a DC error code, it means that the washer is not draining properly. To fix this issue, you should first check the drain hose to make sure it is not clogged or kinked. If it is, you should straighten it out and make sure it is not blocked. You should also check the drain pump filter and make sure it is not clogged. If it is, you should clean it out. If these steps do not resolve the issue, you may need to replace the drain pump.
How To Fix Dc Code On Samsung Washer
1. Unplug the washer from the power source.
2. Check the drain hose for any blockages or kinks.
3. Check the water supply hoses for any kinks or blockages.
4. Check the water inlet valve on the back of the washer for any blockages or debris.
5. Clean the filter in the bottom of the washer.
6. Check the pressure switch for any blockages or debris.
7. Check the drain pump for any blockages or debris.
8. Check the control board for any loose wires or connections.
9. Reset the washer by pressing and holding the power button for 10 seconds.
10. Plug the washer back into the power source and attempt to run a cycle.
The best way to fix DC code on a Samsung washer is to check the wiring connections, make sure all of the hoses are connected properly, and check the drain pump for any blockages. If none of these steps resolve the issue, it is recommended to contact a professional for assistance.