If you have a Crosley refrigerator, you may have noticed an annoying alarm that goes off from time to time. This alarm is designed to alert you if the temperature inside the refrigerator is too high or too low. Fortunately, it is easy to turn off this alarm. Here are the steps you need to take to turn off the Crosley refrigerator alarm.
1. Locate the temperature control panel. This is usually located on the top or side of the refrigerator.
2. Press and hold the “Alarm” button for three seconds. This will turn off the alarm.
3. Adjust the temperature control to the desired setting. This will ensure that the alarm does not go off again.
4. Press the “Alarm” button again to confirm that the alarm is off.
How To Turn Off Crosley Refrigerator Alarm
The Crosley refrigerator alarm is a useful feature, but it can become annoying if it’s constantly going off. Fortunately, it’s easy to turn off the alarm. To do this, simply open the refrigerator door and locate the temperature control panel. There should be a button labeled “Alarm” or “Alarm Off.” Press this button to turn off the alarm. If the alarm does not turn off, check the temperature settings and make sure they are set to the desired level. If the alarm still does not turn off, contact a qualified service technician for assistance.
How To Turn Off Crosley Refrigerator Alarm
1. Locate the alarm button on the front of the refrigerator.
2. Press and hold the alarm button for 3-5 seconds.
3. The alarm should stop and the light should turn off.
4. If the alarm does not stop, unplug the refrigerator from the wall outlet and wait 30 seconds before plugging it back in.
5. If the alarm still does not stop, contact a qualified technician for assistance.
The Crosley refrigerator alarm can be easily turned off by pressing and holding the Alarm Reset button for 3 seconds. This will deactivate the alarm and allow you to continue using your refrigerator without any further disruption. If the alarm continues to sound, you may need to reset the temperature control settings or check for any loose or disconnected wires. If the alarm is still sounding, it is best to contact a qualified technician for further assistance.