If you need to drain your Haier washing machine, it’s a relatively simple process. To begin, unplug the machine from the power source and move it to a location where you can easily access the drain hose. Next, locate the drain hose which is usually located at the back of the machine. Disconnect the hose from the back of the machine and place the other end of the hose into a bucket or sink. Once the hose is in place, turn the knob on the machine to the drain setting. This will cause the water to begin draining from the machine. When the water has finished draining, disconnect the hose from the bucket or sink and reconnect it to the back of the machine. Finally, plug the machine back into the power source and you are finished.
How To Drain Haier Washing Machine
Draining a Haier washing machine is a relatively simple process that can be done in a few steps. First, unplug the washing machine from the wall outlet and turn off the water supply. Next, locate the drain hose and remove it from the back of the machine. Then, place the end of the drain hose into a bucket or sink. Finally, press the drain button on the control panel and allow the water to drain out of the machine. Once the water has finished draining, replace the drain hose and plug the machine back in.
How To Drain Haier Washing Machine
1. Unplug the washing machine from the power source.
2. Place a bucket or large bowl underneath the drain hose.
3. Disconnect the drain hose from the back of the washing machine.
4. Place the end of the drain hose into the bucket or bowl.
5. Turn the washing machine on and select the spin cycle.
6. Allow the washing machine to spin until all the water has been drained.
7. Turn off the washing machine and disconnect the drain hose from the bucket or bowl.
8. Reconnect the drain hose to the back of the washing machine.
9. Plug the washing machine back into the power source.
In conclusion, draining a Haier washing machine is a simple process that can be done in a few steps. First, unplug the power cord and shut off the water supply. Next, remove the drain hose from the back of the machine and place it in a bucket or sink. Finally, press and hold the drain button on the control panel for a few seconds until the water has been completely drained. With these steps, you can easily drain your Haier washing machine in no time.