If you need to drain water from your Samsung Washer, you can do so by following these simple steps. First, unplug the washer from the power outlet. Then, locate the drain hose at the back of the machine. This is usually a white or gray hose with a clamp on one end. Loosen the clamp and remove the hose from the washer. Place the end of the hose into a sink or bucket, making sure that the end of the hose is lower than the washer. Next, turn the washer on and select the spin cycle. This will cause the water to drain out of the washer and into the sink or bucket. Once the water has finished draining, turn off the washer and reattach the drain hose. Finally, plug the washer back in and you’re done!
How To Drain Water From Samsung Washer
1. Unplug the washer from the wall outlet.
2. Turn off the water supply valves to the washer.
3. Place a bucket or other suitable container beneath the drain hose.
4. Disconnect the drain hose from the back of the washer.
5. Position the drain hose so that it is lower than the washer’s water level.
6. Allow the water to drain into the bucket or container.
7. When the water has completely drained, reconnect the drain hose to the back of the washer.
8. Turn on the water supply valves to the washer.
9. Plug the washer back into the wall outlet.
The best way to drain water from a Samsung washer is to turn off the power to the machine, unplug it from the wall, and then use the drain hose to siphon out the water. Make sure to use a bucket or other container to catch the water. Once all of the water is drained, you can then plug the washer back in and turn the power back on.