If you have a Samsung front load washer, you may need to drain it from time to time. This is a simple process that requires only a few steps. First, you will need to unplug the washer from the wall outlet. Then, you will need to locate the drain hose and disconnect it from the back of the washer. Once the hose is disconnected, you will need to place the end of the hose into a bucket or sink. Finally, you will need to turn the washer on its side and use a flathead screwdriver to turn the drain cap counterclockwise. This will allow the water to drain out of the washer. Once the water is fully drained, you can replace the drain cap and reconnect the hose. Finally, plug the washer back into the wall outlet and you are done.
How To Drain Samsung Front Load Washer?
1. Unplug the washer from the wall outlet.
2. Pull the washer away from the wall and move it to an area where you can easily access the drain hose.
3. Locate the drain hose at the back of the washer.
4. Place a bucket or other container below the drain hose.
5. Disconnect the drain hose from the back of the washer.
6. Allow the water to drain into the bucket or container.
7. When the water has finished draining, reconnect the drain hose to the back of the washer.
8. Push the washer back into its original position.
9. Plug the washer back into the wall outlet.
The best way to drain a Samsung front load washer is to first unplug the washer from the wall outlet and shut off the water supply valves. Then, remove the drain hose from the back of the washer and place it in a bucket or sink. Finally, turn the washer on to the spin cycle and allow the water to drain out. Once the water has completely drained out, turn the washer off and disconnect the drain hose. Finally, plug the washer back into the wall outlet and turn the water supply valves back on.