Removing the agitator from a Hotpoint washing machine is a relatively straightforward process. The first step is to unplug the washing machine from the wall outlet. Then, you will need to remove the agitator cap, which is located at the top of the agitator. To do this, you will need to use a flat head screwdriver to remove the screws that hold the cap in place. Once the screws are removed, you can then lift the cap off of the agitator. Next, you will need to remove the bolt that holds the agitator in place. To do this, you will need to use a socket wrench to remove the bolt. Once the bolt is removed, you can then lift the agitator out of the washing machine. Finally, you can then clean the agitator before reinstalling it.
How To Remove A Agitator From A Hotpoint Washing Machine
Removing an agitator from a Hotpoint washing machine is a relatively simple task that can be completed in a few steps. First, unplug the machine from the wall outlet and shut off the water supply. Next, remove the agitator cap by unscrewing the screws that hold it in place. Then, remove the agitator by pulling it straight up. Finally, disconnect the agitator drive shaft from the transmission and lift the agitator out of the machine. Once the agitator is removed, it can be replaced with a new one.
How To Remove A Agitator From A Hotpoint Washing Machine
1. Unplug the washing machine from the power outlet and turn off the water supply.
2. Locate the agitator in the center of the tub.
3. Remove the fabric softener dispenser cup, if present, from the top of the agitator.
4. Remove the screws that hold the agitator in place.
5. Lift the agitator out of the tub.
6. Inspect the agitator for any debris or buildup and clean as necessary.
7. Install a new agitator, if desired, and secure with the screws.
8. Reinstall the fabric softener dispenser cup, if present.
9. Reconnect the power and water supply and test the washing machine.
Removing an agitator from a Hotpoint washing machine is a relatively easy process. All that is needed is a few basic tools, such as a screwdriver, pliers, and a pair of channel-lock pliers. First, the top of the agitator must be removed by unscrewing the screws that hold it in place. Then, the agitator can be pulled out of the machine. Finally, the agitator must be disconnected from the drive shaft and the drive shaft must be removed. With these steps, the agitator can be easily removed from the Hotpoint washing machine.