Welcome to the world of Amana refrigerators! Turning on your ice maker is a simple process that will have you enjoying cold drinks in no time. Here are the steps you need to take to get your ice maker up and running:
1. Locate the ice maker switch, which is usually located on the inside left wall of the refrigerator.
2. Flip the switch to the “On” position.
3. Wait for the ice maker to fill with water. This usually takes about 15 minutes.
4. Once the ice maker is full, it will begin producing ice.
How To Turn On Ice Maker In Amana Refrigerator
To turn on the ice maker in an Amana refrigerator, first locate the ice maker switch on the back wall of the freezer compartment. It should be near the top of the compartment and is easily identifiable by its red switch. Next, slide the switch to the “On” position. The ice maker will begin making ice within 24 hours. If the switch is in the “Off” position, the ice maker will not make ice. If the switch is in the “On” position and the ice maker is not making ice, check the water line and make sure it is properly connected. If the water line is connected, the ice maker may need to be reset. To reset the ice maker, unplug the refrigerator for at least 10 seconds and then plug it back in. The ice maker should then begin to make ice.
How To Turn On Ice Maker In Amana Refrigerator
1. Locate the ice maker switch on the inside of the refrigerator. This switch is usually located on the left side of the refrigerator near the top.
2. Flip the switch to the “On” position.
3. Wait for the ice maker to fill with water. This usually takes about 10 minutes.
4. Once the ice maker is full, it will begin to make ice. Depending on the model, it may take up to 24 hours to produce enough ice for use.
5. If the ice maker is not producing ice, check the water line connection to make sure it is securely connected and that the water supply is turned on.
The Amana refrigerator ice maker can be easily turned on by following the steps outlined in this article. First, make sure the ice maker is plugged in and the water line is connected. Next, press the Ice Maker On/Off switch to the On position. Finally, press the Test/Reset switch for approximately 5 seconds until the red light flashes. After these steps are completed, the Amana refrigerator ice maker should be ready to use.