Removing the drum from a Samsung top loader washing machine is a relatively simple process that requires a few basic tools. Before you begin, make sure to unplug the machine from the wall, and wear protective gloves and eyewear. To begin, open the top of the washing machine and locate the two screws on the back of the machine. Using a Phillips head screwdriver, remove the screws and set them aside. Next, carefully pull out the drum from the machine and set it aside. Finally, remove the belt from the pulley and disconnect the motor from the drum. With the drum now removed, you can easily access and clean the inside of the washing machine.
How To Remove The Drum From A Samsung Top Loader Washing Machine
1. Unplug the washing machine from the power outlet.
2. Remove the top lid of the washing machine by lifting it up from the back.
3. Remove the screws that secure the front panel to the machine.
4. Pull the front panel off and set it aside.
5. Unscrew the drum retaining bolts located on the back of the machine.
6. Carefully pull the drum out of the machine.
7. Disconnect the belt from the drum and the motor.
8. Remove the drum from the machine.
Removing the drum from a Samsung top loader washing machine is a relatively simple process. By following the steps outlined in this article, you should be able to safely and easily remove the drum from the machine. Start by unplugging the machine from the wall and turning off the water supply. Then, remove the back panel and disconnect the hoses from the back of the machine. Next, remove the screws from the top of the machine and carefully lift the drum out. Finally, use a screwdriver to remove the screws from the bottom of the drum before lifting it out of the machine. With these steps, you should be able to safely and easily remove the drum from the Samsung top loader washing machine.