If you are having trouble with your Samsung dryer’s heating element, you may need to reset it. Resetting the heating element can help restore the dryer to its original working condition. This guide will provide you with step-by-step instructions on how to reset the heating element on your Samsung dryer.
First, you will need to unplug the dryer from the wall outlet. Once the dryer is unplugged, you will need to locate the heating element. This is usually located behind the dryer drum. Once you have located the heating element, you will need to remove it from the dryer.
Next, you will need to inspect the heating element for any signs of damage or wear. If the heating element is damaged or worn, you will need to replace it with a new one. Once you have replaced the heating element, you will need to reassemble the dryer.
How To Reset Samsung Dryer Heating Element
1. Unplug the dryer from the wall outlet and turn off the gas supply.
2. Remove the back panel of the dryer and locate the heating element.
3. Disconnect the wires connected to the heating element.
4. Remove the screws that secure the heating element to the dryer.
5. Take out the old heating element and replace it with a new one.
6. Secure the new heating element in place with the screws.
7. Reconnect the wires to the new heating element.
8. Replace the back panel of the dryer.
9. Plug the dryer back into the wall outlet and turn on the gas supply.
10. Test the dryer to make sure the heating element is working properly.
How To Reset Samsung Dryer Heating Element
In conclusion, resetting the Samsung dryer heating element is a relatively simple process. First, unplug the dryer from the wall outlet and remove the back panel. Then, locate the thermal fuse and check for continuity with a multimeter. If the fuse is blown, replace it with a new one. Finally, reassemble the dryer and plug it back into the wall outlet. With these steps, you should be able to reset the Samsung dryer heating element and get your dryer working again.