If your Haier washing machine is not draining properly, you may need to clean the drain filter. This guide will show you how to properly drain your Haier washing machine.
First, turn off the power to the washing machine. Unplug the power cord from the outlet or switch off the power at the breaker box. Next, locate the drain filter at the bottom of the machine. It will be a small, round, white plastic piece. Carefully remove the drain filter by turning it counterclockwise. Once it is removed, empty the contents into a bucket or sink. Clean the filter with warm, soapy water and a soft brush. Rinse the filter and replace it back into the machine. Finally, turn the power back on and run a cycle to test the drain. If the machine is still not draining properly, you may need to call a professional to help.
How To Drain Haier Washing Machine
Draining a Haier washing machine is a relatively simple process. First, unplug the machine from the power source and shut off the water supply. Then, remove the drain hose from the back of the machine and place it in a bucket or sink. Next, locate the drain pump filter and unscrew the cap. Empty the water from the filter and then reattach the cap. Finally, turn the power back on and select the drain cycle to finish emptying the water from the machine.
How To Drain Haier Washing Machine
1. Unplug the washing machine from the power outlet.
2. Turn off the water supply valves located behind the machine.
3. Place a bucket or tub underneath the drain hose located at the back of the machine.
4. Remove the drain hose from the back of the machine and place the end of the hose in the bucket or tub.
5. Turn the dial on the front of the machine to the “Drain” setting.
6. Allow the water to drain completely from the machine.
7. Once the water has finished draining, turn the dial back to the “Off” setting and replace the drain hose.
8. Turn the water supply valves back on and plug the machine back into the power outlet.
In conclusion, draining a Haier washing machine is a simple process that should only take a few minutes. All you need to do is locate the drain hose, disconnect it from the machine, and place the other end in a bucket or sink. Once the water has been drained, reconnect the hose, and your washing machine is ready to be used again.