If you have a Haier top load washing machine, you can access the diagnostic mode to troubleshoot any issues you may be having. To access the diagnostic mode, first unplug the machine from the wall outlet and then press and hold the “Start/Pause” and “Delay Start” buttons simultaneously. While continuing to hold these two buttons, plug the machine back into the wall outlet. The machine will then enter diagnostic mode and you will be able to view any error codes or troubleshoot any issues.
How To Get A Haier Top Load Washing Machine To Diagnostic
To enter diagnostic mode on a Haier top load washing machine, first unplug the machine from the wall outlet. Then, press and hold the “Power” and “Delicate” buttons simultaneously for three seconds. The machine will enter diagnostic mode and the display will show “dE1”. To exit diagnostic mode, press and hold the “Power” and “Delicate” buttons again for three seconds. The machine will return to normal operation.
How To Get A Haier Top Load Washing Machine To Diagnostic
1. Unplug the washing machine from the wall outlet.
2. Press and hold the “Start/Pause” and “Delay Start” buttons simultaneously for 5 seconds.
3. Release the buttons and press the “Delay Start” button again.
4. The display will show “Diagnostic Mode” and the washing machine will enter diagnostic mode.
5. Press the “Delay Start” button to cycle through the diagnostic codes.
6. When you find the code you are looking for, press the “Start/Pause” button to exit diagnostic mode.
In conclusion, getting a Haier top load washing machine into diagnostic mode is a relatively simple process. First, unplug the machine and press and hold the start and pause/cancel buttons simultaneously. Then, plug the machine back in and continue to hold the buttons until the diagnostic mode is reached. Once in diagnostic mode, the machine can be tested and adjusted as needed.