How To Drain Hotpoint Washing Machine

If you need to drain your Hotpoint washing machine, it’s a relatively simple process. All you need is a bucket or other container to catch the water, and a flat-head screwdriver. This guide will walk you through the steps of draining your Hotpoint washing machine.

How To Drain Hotpoint Washing Machine

If you need to drain a Hotpoint washing machine, the process is fairly simple. First, unplug the machine from the wall outlet and turn off the water supply. Then, remove the drain hose from the back of the machine and place it in a bucket or sink. Next, turn the dial to the spin cycle and press the start button. The machine will begin to spin and the water will start to drain. Once the water has stopped draining, turn the dial back to the off position and disconnect the drain hose. Finally, plug the machine back in and turn the water supply back on.

How To Drain Hotpoint Washing Machine

1. Turn off the water supply to the washing machine by turning off the valves located behind the machine.

2. Unplug the washing machine from the electrical outlet.

3. Place a bucket or pan under the drain hose.

4. Disconnect the drain hose from the back of the washing machine.

5. Allow the water to drain out of the hose and into the bucket or pan.

6. Once all of the water has been drained, reconnect the drain hose and plug the washing machine back into the electrical outlet.

7. Turn on the water supply to the washing machine by turning on the valves located behind the machine.

The best way to drain a Hotpoint washing machine is to unplug the machine from the wall, disconnect the hose from the back of the machine, and use a wet/dry vacuum to suck out the water. Make sure to wear protective gloves and eyewear when doing this. Once the water is removed, plug the machine back in and turn it on to make sure it is working properly. If you have any further questions about draining a Hotpoint washing machine, contact a qualified appliance repair technician.