Disassembling a Whirlpool dehumidifier can be a daunting task. However, with the right tools and knowledge, it is a relatively simple process. Before beginning, make sure you have the right tools for the job. You will need a screwdriver, a pair of pliers, and a utility knife. Additionally, you will need to make sure that the dehumidifier is unplugged from the wall and all of the water has been drained from the unit. Once you have the necessary tools and the dehumidifier is ready to be disassembled, you can begin the process.
How To Dissemble Whirlpool Dehumidifier
1. Unplug the dehumidifier from the wall outlet.
2. Remove the screws from the back panel of the dehumidifier.
3. Carefully lift the back panel off the dehumidifier.
4. Disconnect the wiring harness from the circuit board.
5. Remove the screws from the fan housing and lift it off the dehumidifier.
6. Disconnect the drain hose from the drain pan.
7. Remove the screws from the evaporator coil and lift it off the dehumidifier.
8. Remove the screws from the condenser coil and lift it off the dehumidifier.
9. Remove the screws from the control panel and lift it off the dehumidifier.
10. Disconnect the wiring harness from the control panel.
11. Remove the screws from the compressor and lift it off the dehumidifier.
How To Dissemble Whirlpool Dehumidifier
To dissemble a Whirlpool dehumidifier, first unplug the unit from the wall outlet and remove the filter from the front of the unit. Next, remove the screws that secure the back panel to the unit. Carefully lift the panel off the unit and disconnect the power cord from the circuit board. Then, remove the screws that hold the fan assembly in place and carefully lift the fan out of the unit. Finally, remove the screws that secure the compressor to the unit and carefully lift the compressor out of the unit. With these steps, you can easily dissemble a Whirlpool dehumidifier.