If you have an Amana washer with a lid lock switch and it is not working properly, you may be able to bypass the lid lock switch in order to get your washer working again. Bypassing the lid lock switch is a relatively simple process that can be done with a few basic tools and a bit of patience. This guide will explain how to bypass the lid lock switch on an Amana washer.
How To Bypass Lid Lock Switch On Amana Washer
The lid lock switch on an Amana washer is designed to prevent the washer from operating when the lid is open. However, if the lid lock switch fails, it is possible to bypass the switch in order to use the washer. To do this, you will need to locate the lid lock switch and unplug the two wires connected to it. Then, you will need to connect the two wires together and tape them securely. This will bypass the lid lock switch and allow the washer to operate. However, it is important to note that this is a temporary fix and the lid lock switch should be replaced as soon as possible.
How To Bypass Lid Lock Switch On Amana Washer
1. Unplug the washer from the wall outlet.
2. Locate the lid lock switch and remove the screws that hold it in place.
3. Disconnect the wires from the lid lock switch.
4. Connect the wires to a jumper wire.
5. Plug the washer back into the wall outlet.
6. Test the washer by starting a cycle.
In conclusion, the best way to bypass the lid lock switch on an Amana washer is to use a bypass kit. This kit will allow you to bypass the switch and keep the lid open while the machine is running. It is important to note that this is a temporary solution and should only be used if absolutely necessary. If the lid lock switch is malfunctioning, it is best to have it replaced by a professional.