If you need to get to the evaporator coil on a Kitchenaid refrigerator, the process is relatively simple. First, you will need to unplug the refrigerator from the wall outlet and remove the back panel. You should then be able to locate the evaporator coil. It will be a metal coil located near the back of the refrigerator. Once you have located the evaporator coil, you can use a screwdriver to remove the screws that hold it in place. After that, you can carefully remove the evaporator coil from the refrigerator. Be sure to take extra care when handling the evaporator coil as it is delicate and can be easily damaged.
Popular: How To Tighten Handle On Kitchenaid Refrigerator
How To Get To The Evaporator Coil On A Kitchenaid Refrigerator
To access the evaporator coil on a Kitchenaid refrigerator, first unplug the refrigerator and remove the back panel. Then, locate the evaporator coil and disconnect the electrical wiring harness. Next, unscrew the evaporator coil from the back panel and remove it. Finally, clean the evaporator coil with a vacuum cleaner and reassemble the refrigerator.
Recommended: How To Disable Alarm On Kitchenaid Refrigerator
How To Get To The Evaporator Coil On A Kitchenaid Refrigerator
1. Unplug the refrigerator from the wall outlet.
2. Remove the screws that secure the back panel of the refrigerator to the wall.
3. Locate the evaporator coil, which is typically located behind the refrigerator’s back panel.
4. Carefully remove the evaporator coil from its mounting bracket.
5. Check the evaporator coil for any signs of damage or debris.
6. Clean the evaporator coil with a soft brush and vacuum cleaner.
7. Reinstall the evaporator coil and secure it with the mounting bracket.
8. Replace the back panel and secure it with the screws.
9. Plug the refrigerator back into the wall outlet.
Favorite: How Do You Reset The Water Filter Light On A Kitchenaid Refrigerator
In conclusion, getting to the evaporator coil on a Kitchenaid refrigerator is a relatively simple process. First, you will need to unplug the refrigerator and remove the back panel. Next, you will need to locate the evaporator coil, which is typically located behind the fan motor. Once you have located the evaporator coil, you can use a screwdriver to remove the screws that hold it in place. After that, you can carefully remove the evaporator coil and inspect it for any signs of damage. If the evaporator coil is damaged, it should be replaced with a new one. Following these steps should help you get to the evaporator coil on a Kitchenaid refrigerator.