Removing a freezer drawer from a Whirlpool Gold refrigerator is a relatively simple process that requires only a few tools. Before beginning, be sure to unplug the refrigerator from the wall outlet and empty the drawer of all contents. Once the drawer is empty, you will need to locate the two screws located on the underside of the drawer.
These screws hold the drawer in place. Using a Phillips head screwdriver, remove the screws and set them aside. Once the screws have been removed, you can gently pull the drawer out of the refrigerator. If the drawer is stuck, use a putty knife to gently pry the drawer open. Once the drawer is removed, you can clean the inside of the refrigerator and replace the drawer.
How To Remove Freezer Drawer Whirlpool Gold
1. Unplug the refrigerator from the power source.
2. Open the freezer door and locate the drawer.
3. Remove the screws that hold the drawer in place.
4. Pull the drawer out of the freezer.
5. Disconnect the drawer from the freezer by removing the screws that attach it to the freezer.
6. Remove the drawer and any other parts that may be attached.
7. Clean the drawer and any other parts with a mild cleaner.
8. Reassemble the drawer and any other parts, making sure to replace any screws that were removed.
9. Slide the drawer back into place in the freezer.
10. Secure the drawer with the screws that were removed.
11. Plug the refrigerator back into the power source.
Removing a freezer drawer from a Whirlpool Gold refrigerator is a straightforward process. First, locate the two screws that hold the drawer in place and remove them. Then, tilt the drawer up and out to remove it from the refrigerator. After the drawer is removed, it can be cleaned and replaced or a new drawer can be inserted. With a few simple steps, you can easily remove a freezer drawer from a Whirlpool Gold refrigerator.