Removing a freezer drawer from a Whirlpool WRX988SIBM refrigerator is a relatively simple process. First, locate the drawer on the bottom of the refrigerator. There are two tabs located on the sides of the drawer. Push in on the tabs and pull the drawer out of the refrigerator. You may need to use a bit of force to get the drawer out. Once the drawer is out, you can remove the drawer from the refrigerator by lifting it up and out. Be sure to place the drawer on a flat surface and be careful not to drop it. After the drawer is removed, you can replace it with a new drawer or clean the old one.
How To Remove Freezer Drawer Whirlpool Wrx988Sibm
1. Unplug the refrigerator from the wall outlet.
2. Open the freezer door and locate the drawer slides.
3. Pull the drawer out as far as it will go.
4. Lift up the drawer slightly and then pull it out the rest of the way.
5. Disconnect the drawer from the slides by pressing the release tabs on each side.
6. Lift the drawer out of the freezer.
7. Clean the drawer and the slides with a damp cloth.
8. Reinstall the drawer by aligning the slides with the slots on the drawer and pushing it back in.
9. Reconnect the drawer to the slides by pressing the release tabs.
10. Plug the refrigerator back into the wall outlet.
How To Remove Freezer Drawer Whirlpool Wrx988Sibm
Removing the freezer drawer from a Whirlpool WRX988SIBM refrigerator is a relatively simple process. First, remove the screws from the back of the drawer and slide it out. Then, disconnect the electrical connections and lift the drawer out. Finally, remove the screws from the drawer glides and slide the drawer out of the refrigerator. With a few simple steps, you can easily remove the freezer drawer from your Whirlpool WRX988SIBM refrigerator.